905 nm diode laser module0 pages
RgBLase LLC
P/N: FBX – 905 – XXX
V1.0
Temperature Stabilized Semiconductor Laser Module
Key Features:
Fiber Coupled or Free Space
Low Power Consumption
Constant Optical Power
TTL Modulation Option
Low Optical Noise
ESD Protection
Plug & Play
Applications:
Bio Technology
Photo Finishing
Semiconductor Instrument
Medical Instrument
Scientific Research
The FreeBeamTM905 Infrared Laser Module is a highly integrated free space violet laser module
with laser optics and electronics into a single package. It features very low optical noise and up to
20 KHz TTL modulation. Low temperature setting can improve laser operation lifetime. The
unique designed electrical driver enable this Laser Module has the lowest power consumptions
compare to the similar product in the industry.
The FreeBeamTM905 Infrared Laser Module came with two different packages for you to choose
from. Tub style part number start with FBT, box style start with FBB. FBB can allow you to
remotely control Laser output power through electrical cable connect to the back panel of the
package, while FBT can allow you to control optical power locally through a potential meter on the
back panel of the laser tube.
The FreeBeamTM905 Infrared Laser Module is available for single mode and multi mode fiber
coupled configuration.
The FreeBeamTM905 Infrared Laser Module is a Class III b laser product.
Specifications:
Part Number
Wavelength
Spectrum width
Output Power
Noise(RMS)
Power stability
Beam pointing stability
Polarization
Beam diameter
Beam divergence
Operation Voltage
Operation Current
FBX – 905 - XXX
905nm ± 5nm
Typical 0.5nm, Max 2nm.
100mW
<0.3%
8hrs, <2%
<10urad/°C
100 : 1
1.8 X 0.7mm
0.3 X 0.6 mrad
9V+/- 0.5V DC
TEC Max 2.5 A, LD Max 140mA
This component does not comply with the Federal Regulations (21 CFR Sub chapter 1) as administered by the Center for Devices and Radiological health.
Purchaser acknowledges that his/her products must comply with these regulations before they can be sold to a customer. The output light from this product is
harmful to a human body even if it is invisible. Avoid looking at the output of this product directly, or through a lens during operation. Observance of operation
should be through a TV camera or related equipment. Refer to IEC 825-1 and 21 CFR 1040.10-1040.11 as a radiation safety standard for laser products.
RGBLase LLC follows a policy of continuous product improvement. Specifications are subject to change without notice.