D5 & D6 LVDT Displacement Transducer0 pages
20071120 1/3 www.rdpe.com/us/d5-d6.pdf
All dimensions and specifications are nominal.
Specification
Excitation/supply (acceptable) 0.5V to 7V rms, 2kHz to 10kHz (sinusoidal)
Excitation/supply (calibrated) 5V rms, 5kHz (sinusoidal)
Output load 100k Ohms
Temperature coefficient (zero) ±0.006% F.S. /°F (typical)
Temperature coefficient (span) ±0.006% F.S. /°F (typical)
Operating temperature range -4°F to 257°F
Electrical termination 6.6ft (integral cable) Longer available to order.
DISPLACEMENT
D5 & D6 LVDT Displacement Transducer
œ Infinite resolution
œ High cycle life
œ Stainless steel
œ High accuracy
œ Miniature
These transducers are for displacement / position measurement. They make an accurate position
measurement of the movement of the armature (the sliding part) relative to the body of the displacement
transducer.
This transducer uses the Linear Variable Differential Transformer (LVDT) principle which means that it is
probably the most robust and reliable position sensor type available. The strength of the LVDT sensor's
principle is that there is no electrical contact across the transducer position sensing element which for the user
of the sensor means clean data, infinite resolution and a very long life.
The LVDTs are available as either unguided or spring return versions.
Due to our policy of on-going development, specifications may change without notice. Any modification may
affect some or all of the specifications for our equipment.