Cigar rolling machine - Case study0 pages
Cigar rolling machine
Before
Equipment to be used:
After
Blaster: BL60
Air volume: Less than 4-6 m3/min
Low pressure: 5-6 bar
Micro Pellets (Ø1,7 mm)
Round nozzle inside machine
Wide angle nozzle on surfaces
Feasibility study:
Dry Ice was preferred because:
•t The process is dry
•t Short down time
•t Dry ice could be produced on-site using
Aquila Triventek PE80 + RE80 equipment,
generator and a mobile CO2 tank
•t Use to be manually cleaned. 1 machine per
hour. With Dry Ice cleaning is 15 min.
Note:
Pay attention to sensors and plastic clips
Do not blast directly into bearings
Aquila Triventek A/S · Industrivej 9 · DK-5580 Nørre Aaby · Tel. +45 70 22 12 92 · aquila@triventek.com · www.aquila-triventek.com
"