building cables0 pages

smian

Group

Building cables

^PRYSMIAN

Draka

Optical cable

For indoor and outdoor installation.

Cable design_

• Central Strength Member (CSM).

• Loose Tube containing fibres and filled with a suitable water tightness compound.

• Loose tubes SZ stranded around the CSM.

• Longitudinal Water Tightness: dry core with water swellable elements.

• Peripheral Strength Elements

• Ripcords

• Outer Sheath: HFFR.BIack.

-not to scale -

Features and advantages_

Indoor/outdoor installation.

- Suitable for installation in buildings and tunnel backbones where zero halogen, flame retardance

and low smoke emission are required.

- Those cables may be installed as well in the outside plant as inside buildings.

Static cable bending radius 15 x cable diameter

Temperature range -40°C to +70°C

Technical data

Number of fibres (xl2) < 12 24 36 48 60 72 96 144 192 288

Cable diameter mm 10.4 10.4 10.4 10.4 10.4 10.9 12.2 15.5 15.9 18

Cable weigth kg/km 110 110 110 110 110 120 145 225 230 290

International standards

IEC 60794; IEC 60793 ; IEC 60332-1; IEC 61034 ; IEC 60754 ;

ITU-T Rec. G.650; ITU-T Rec. G.652; ITU-T Rec. G.655; ITU-T Rec. G.656;

ITU-T Rec. G.657;

© PRYSMIAN GROUP 2012, All Rights Reserved

All sizes and values without tolerances are reference values. Specifications are for product as supplied by Prysmian Group: any modification or alteration afterwards of

product may give different result. The information contained within this document must not be copied, reprinted or reproduced in any form, either wholly or in part, without

the written consent of Prysmian. The information is believed to be correct at the time of issue. Prysmian Group reserves the right to amend this specification without prior

notice. This specification is not contractually valid unless specifically authorised by Prysmian Group.

www.prysmiangroup.com