WM526 Electronic floor pedal0 pages

=

Electronic Floor Pedal

The Electronic Floor Pedal WM-526 is designed for all
commercial
vehicle
applications
and
is
highly
customizable.
The Electronic Floor Pedal WM-526 is available in kick
down and non-kick down versions.
The unit is equipped with a Hall-effect, non-contact sensor
that can be programmed for analog output and/or
integrated switches. The electronics are IP67 sealed and
highly EMI resistant (SAE J1113). If necessary, the unit
can also be customized with contact or PWM output
sensors.
The Electronic Throttle Control provides a robust design
with a corrosion resistant cast aluminum treadle and a
coated steel base plate. The pedal is available in three
treadle angles: 28.5, 35, and 45 degrees. The treadle is
supplied with a rubber cover for improved foot traction.

SPECIFICATIONS
PRODUCT LIFE

Full Travel Cycles

10,000,000

ELECTRONICS

Seal Integrity
EMI

Electronics IP67 sealed (IEC 60529)
SAE J1113 Compliant

ELECTRICAL

Operating Voltage
Output Signal

5V and 12V-24V
Dual APS, Dual PWM, APS, PWM,
APS/IVS

PEDAL ANGLE

Degrees

28.5°, 35°, 45°

MECHANICAL

Static Load
Vibration

1500N
3 hour, 3-axis, random broadband up to 4g

ENVIRONMENTAL

Operating Temp Range
Storage Temp Range
Humidity
Sand/Dust

-40°C to 85°C
-40°C to 85°C
95% RH for 120 hours
Tested to SAE J1455

MATERIALS

Main Body
Mounting Plate
Treadle cover

Cast Aluminum
Coated Steel
NBR Rubber

Industrial G