PENKO FLEX2100 RANGE0 pages

PENKO

Panel mount

FLEX™ 2100

Stainless steel mount

SPECIFICATIONS
Wiring
Sense system
Minimum bridge resistance
Number of load cells
Sensitivity
A/D Conversion Speed
Internal Resolution
A/D Converter type
Display Resolution
Display Step
Decimal Comma
Full Scale Range
Excitation voltage
Non Linearity
Offset Drift
Span Drift
Digital Filters
Overall Filter
Calibration Methods

Measurement Functions
Memory Allocation
Real-Time Clock

Full Wheatstone bridge with passive connections (6-wire system).
Passive sense system
43.75 Ohm @ 5V exc.(certified at 87,5 Ohms)
1 channel 1 - 8 Load cells 350 Ohm @ 5V exc.
1 - 16 Load cells 1100 Ohm @ 5V exc.
0.1 – 0.5 µV minimum voltage for verification scale
Certified with 0.4 µV per part / 10000 parts
1600 measurements per second
24 Bits (16,777,216 parts)
Sigma-Delta, ratio metric, isolated from digital
100,000 divisions max.
x1, x2, x5, x10,x 20 x50, x100, x200.
Selectable between any digits of the display value
-2.5 mV to +11.25 mV ( -0.5mV/V to +2.25mV/V)
5 VDC
< 0.005 % of reading
< +/- 2 ppm/°C
< +/- 2 ppm/°C
High performance digital filters 1-10 Hz
0 to -50 dB
Dead load and Span with up to 8 point linearization,
Millivolt calibration
G - CAL (Gravity correction)

Automatic zero tracking, motion detection, zero, tare, preset tare,
net mode, peak hold, valley hold, bar graphs multi range, multi interval
Calibration data Flash, dynamic data in SRAM with battery backup.
Standard with NiMh battery backup.

PENKO Engineering B.V. ■Tel +31 (0)318 525630 ■Fax +031 (0)318 529715 ■info@penko.com
Web ■www.penko.com ■Copyright © 2010 ETC. All Rights Reserved. All product information and specifications subject to change. 7600L1084-EN-R2