MTB Series Linear Actuators - MTB 042, MTB 055, MTB 0800 pages
LINEAR ACTUATOR TECHNOLOGY
MT Series
MTB 42 Belt Driven Linear Actuator
The MT Series offers a number of profile
sizes with multiple design configurations
to fit almost any application.
TECHNICAL DATA
features & benefits
• High Acceleration, Speed & Rigidity
Size
mm
42 x 42
• Long Travel Length
Max. Speed
m/s
5
in/s
196.85
• Low Friction, Noise & Vibration
Max. Stroke Length
mm
2,000
in
78.74
• Strong yet Lightweight & Corrosion Resistant
Min. Stroke Length
mm
100
in
3.94
• Multiple Accessories & Options
Pulley Drive Ratio
mm
90
in
3.54
Number of Pulley Teeth
0.784
lb
1.73
Kg
.291
lb
0.64
Fx
N
460
lbf
103
Max. Load
5
Fy
6–t Multiple drive
t configurations
3
2
6
1.t Moment arms for calculating moments should be measured from the centerline of the extrusion.
2. tLimit switches must be used in order to prevent the carriage from contacting the actuator end
blocks, resulting in damage.
3. t25 mm of over-travel has been added to the body length in each direction to allow for carriage
over-travel. 25 mm is the recommended over-travel; although a minimum of 10 mm may be
specified for special applications.
Moment of Inertia
lbf
351
1,560
lbf
351
Mx
Nm
20
lbf-in
177
Nm
55
lbf-in
487
Mz
4
1,560
N
My
Max. Moments
N
Fz
1
5–t T-slots for mounting
t and sensor mounting
NOTE:
Kg
Add for 100 mm or 3.94 in of Stroke
2–t Steel reinforced belt capable of handling high loads
4–t Adjustable belt tension
3,500
Base Weight
1–t Anodized aluminum housing and carriage
3–t Ball guided rail system
18
Max RPM
Key Features
in 1.65 x 1.65
Nm
55
lbf-in
487
Ix
4
Iy
Max. Radial Load on Input Shaft
No Load Torque
cm
cm
4
12
15
in
4
0.29
in
4
0.36
N
220
lbf
49.5
Nm
0.8
lbf-in
7.1
For combined loads, the combined loading
cannot exceed the following formula.