DS1042 Power over Ethernet (PoE) in cabinet0 pages

DS1042

Power over Ethernet (PoE)
in cabinet
System specifications
Cabinet construction

ABS plastic/ Powder coated metal

12V DC outputs

2

Cable type

CAT5

UL 294 Rated

Yes

ACU integration

Net2 Plus

Electrical
Supply voltage input

36V - 57V DC (0.83A)

Output current

12V DC (2A)

Output current (PoE+ AT type 2)

1.5A

Output power (PoE+ AT type 2)

20.4W

Output current (AF - AT type 1)

0.8A

Output power (AF - AT type 1)

10.36W

Other hardware features
Mains failure warning

No

Removable rising
clamp terminal blocks

Yes

Tamper switch

Yes

Fitting kit

Yes

Environment
Operating Temperature

0°C - +45°C
+32°F - +113°F

Moisture resistance

No - if used externally, it must be
protected in a weatherproof housing

Vandal Resistance

Low

Power over Ethernet (PoE) is a technology that allows both
power and data to be passed along Ethernet cabling, the most
common type of cable being Cat5. Ethernet is the collection of
structured data cabling that already exists to connect all local
area network (LAN) based equipment, for example PCs.
By combining Net2 plus ACU's with PoE, Paxton access control
systems become even faster, easier and cheaper to install. You no
longer need to include a separate mains power supply, saving
on extra cabling and installation time. PoE simply plugs straight
into the existing LAN using a standard RJ45 plug (providing it is
powered by either a PoE switch or a PoE injector). It can then be
detected and configured from the Net2 software in exactly the
same way as any other Net2 access control unit.
Net2 plus control units with PoE are designed to work
seamlessly in the event of a communications failure, meaning
the control unit will continue to permit or deny access to users
as appropriate. Once communications are re-established the
activity is reported back to the PC.