NPM-TT0 pages
Panasonic
nnnnideas for life
nnnn2012
nnnnElectronics Assembly System f^S
nnnncatalog
nnnnPRODUCTION MODULAR
nnnn/VFVI/I
nnnnNEXT PRODUCTION MODULAR
nnnnManufacturing Process Innovation
nnnnNPM-TT
nnnnModel No. NM-EJM3D
nnnn*lt may not conform to Machinery Directive
nnnnconfiguration and custom-made specification.
nnnnNPM-TT
nnnnPCB dimensions | Dual-lane mode | L 50 mm x W 50 mm ~ L 510 mm x W 590 mm | PCB exchange time | Single-lane mode | 4.0 S (With no component mounted on the reverse side of PCB) |
Single-lane mode | L 50 mm x W 50 mm ~ L 51 0 mm x W 300 mm | Dual-lane mode | 0 S* *No Os when cycle time is 4.0 s or less | ||
Electric source | 3-phase AC 200. 220. 380. 400. 420. 480 V 2.5 kVA | ||||
Pneumatic source'i | Min.0.5 MPa. 200 L /min (A.N.R.) | ||||
□imensions'i | W 1 300 mm-2 x D 2 798 mm x H 1 444 mm *3 | ||||
Mass | 2 650 kg>4 (Only for main body:This differs depending on the option configuration.) |
Placement head
nnnn8-nozzle head (With Dual Heads )
nnnn3-nozzle head*5 (With Dual Heads )
nnnnPlacement speed | 36 OOOcph (0.1 s/chip) | 1 4 400 cph (0.25 s/chip) 1 1 000 cph (0.33 s/QFP) | |
Placement accuracy(Cpk£ 1) | +40 A/m/chip ±30 ym/QFP n12mm ~ c32 mrr +50 A/m/QFP □! 2 mm Under | ±30 urn/ QFP | |
Component dimensions (mm) | (01005") 0402 chip.etoL32 X W 32 X T 1 2 | (0201") 0603 chip to L 150 x W 25 (diagonal 152) x T 28 | |
Component supply | Taping | Tape : 8—56 / 72 mm | Tape:8 to56/72/88/ 104 mm |
Max.52 ( 8 mm tape : double feeder, (small real)) | |||
Stick | Max. 6 | ||
Tray | Max 40 (front lane: Max. 20 + rear lane: Max. 20) |
* Placement tact time.inspection time and accuracy values may
nnnndiffer slightly depending on conditions
nnnn* Please refer to the specification booklet for details.
nnnn*1 : Only for main body
nnnn*2 : 1 820 mm in width if extension conveyors (260 mm)
nnnnare placed on both sides
nnnn*3 : Excluding monitor and signal tower
nnnn*4 : In standard configuration
nnnn(main body, 2 tray feeders), the mass becomes 3 050 kg.
nnnn*5 : 3-nozzle head cannot be installed on NPM-D
nnnn*6 : The 0402 chip requires a specific nozzle/feeder.
"