HIM HART® Interface Module0 pages

Smart HART

LoopInterface and Monitor

January 2005 Data Sheet 9.80

Description

The HIM HART Loop Interface and Monitor unlocks
the full potential of new and in-place smart HART
multivariable transmitters and valves. Converts HART to 4-20mA Signals The HIM allows up to three additional analog
process variable measurements from a smart device
with no additional process penetrations or wiring. Take Full Advantage of ΓLegacy Instruments The HIM lets you leave trusted (and paid for) smart
HART transmitters and valves in place, yet still take
advantage of all the information they have to offer. Works With Every Smart HART Device With a very simple PC program, the HIM programs in
minutes to interface with every HART-compatible
monitoring and control device: >
The HIM HART Loop Monitor features a compact metalhousing that mounts on a standard DIN-rail or on a surface ԕ Multivariable Mass Flow Transmitters >

Features

Dual-Sensor Temperature Transmitters ՕBreak OutӔ up to three analog signals. High/Low process and loop diagnostic alarms. Sets up as a Primary or Secondary Master, or inՓListen Mode. The HIMprovides additional analog signals proportional to a
multivariable transmitterԒs primary, second, third or
fourth variables, or to user-selectable valve
parameters such as stem position. Pressure Transmitters Two relays individually configure to respond to high
or low process conditions, or trip when transmitter
diagnostics or loop fault conditions are sensed.Օ User configurable to act as aHART Master, or in passive ListenӔ Mode (see
Page 5 for details). Coriolis, Magnetic, Ultrasonic and Vortex FlowMeters ՕIsolated output channels. Normal or Burst HART Modes. Delivers superiorprotection against the harmful effects of ground
loops and other plant noise. The HIM can beset to monitor smart HART instruments operating in
either Normal (Poll/Response) Mode or in Burst
Mode (see Page 5 for details).Օ Large, 5-digit display. Shows a selected processvariable in engineering units (input or output) or
toggles between any two variables. The display
also provides on-site indication of HART instrument
fault conditions. pH Transmitters Օ Radar and Hydrostatic Level Transmitters Valve Positioners and Damper Operators >
Certifications Canadian Standards Association (CSA-IntՒl) General/Ordinary Locations Non-Incendive Apparatus (except -1PRG models) Class I , Division 2, Groups A, B, C, D Temperature Code: T5@70C Max. Op. Amb. CE Conformant ЖEMC Directive 89/336/EECEN 61326 2005 Moore Industries-International, Inc.
224-710-07D Page 1 size="-2">