Instructions for Replacing the Diamond Cleaver Blade and Anvil0 pages

Anvil
Diamond
Cleaver
Blade

Positioner
Plate

Instructions
for Replacing
the Diamond Cleaver
Blade and Anvil
Replacement Part No. AT03290

Contents:
1
1
2

!

Handle the diamond cleaver
blade with extreme caution!
It is very fragile.

INSTRUCTIONS:
1 Using a small Phillips screwdriver,
remove the positioner plate from
the Diamond Cleave Tool.
2 With a jeweler’s flathead screwdriver, remove the two small screws
holding the blade and anvil in the
housing. Remove the blade and
anvil from the housing.

Anvil
Diamond Cleaver Blade
Small Replacement Screws

3 Install the new diamond blade and
anvil. The anvil should be on the
left side, the diamond blade plate
on the right. The beveled (slanted)
edges on both the blade and anvil
tips should be oriented to the top of
the cleave tool. (See sample
illustration above.) Do not overtighten small screws. Extras are
provided in case of error.
For best results, clean diamond
cleaver blade and anvil after
every 50 cleaves.

Phone: (860) 678-0371 | Toll-free: (888) 438-9936

AT03301 Rev. D