TRIMLINE-60 pages

NUTEC COMPONENTS INCORPORATED 81 Jefryn Boulevard, Deer Park NY 11729 www.NUTEC1.com
TML-6 SP
Travel Length mm
100-300
Drive System
NEMA # 23 Servo motor Roller Lead Screw
1mm pitch
Maximum Acceleration
Payload Dependent
Maximum Speed
Unladen 40 mm/s
Maximum Thrust
125 N
Recommended Maximum Loading
50 kg
L1 Parallel to Base
50 kg
L2 Tension
Perpendicular to base
50 kg
L3 Compression
Perpendicular to base
50 kg
Feedback
Rotary Encoder
Accuracy
±20ìm / 300mm
TTL resolution
0.1ìm
Repeatability
±1ìm
Construction
Aluminum Alloy Body
Hard Coat Gray
Anodize
Trimline-6
.. Long life linear motion guide bearing system
.. Ultra-fine resolution
.. Integral bellows way covers
.. Low profile, compact design
.. Submicron repeatability
.. Optional high-accuracy linear encoder
PRODUCT SUMMARY
Tracline-6 Modular Series, screw driven linear translation stages offer exceptional performance characteristics. Combining precision features into a rugged, versatile stage design, tracline-6 is suitable for use in automated, inspection, measurement and fabrication processes, and multiple other industrial and laboratory applications.
TRIMLINE-6
Trimline-6 Features & Benefits
The fine-pitch roller lead screw offers higher resolution and is capable of substantial transport velocities. The continuous rolling motion action of the roller lead screw permits high rpm motor speed for increased translation speed. This drive screw mechanism is integrally preloaded for a play-free operation and features low hysteresis which improves bi-directional repeatability. The fine-pitch roller lead screw drive does not require an electric brake to prevent back-driving when trimline stages are used in vertical, Z axis, applications.
Constant support geometry creates a mechanical bearing platform where the saddle is always supported at the load point in an identical way over the entire length of travel. This creates a trajectory with a lower error bandwidth. The pre-loaded multi-track precision linear guide system with four bearing carriages together with the mono-block extruded high-strength aluminum alloy base achieve higher accuracy and stiffness and superior flatness and straightness not affected by moment loading and load location.
Applications
Trimline positioning stages are designed as versatile high performance modules. Selected high-performance components are combined with precision fabricated machined components to achieve outstanding positioning performance with extended life expectancy. The stage base is fabricated from a specially selected hardened high-strength aluminum alloy slab, precision machined to extremely close tolerances. In addition, the saddle is equipped with a wear resistant hard-coat anodized protective finish.