Height Gages0 pages

Height Gage
A standard measuring tool of industry

Digimatic Height Gage
SERIES 192 — Multi-function Type with SPC Data Output

10

• Double-column structure ensures high
measuring accuracy.
• Ergonomic base fits comfortably in the hand.
• Bidirectional touch-trigger probe is available
as an optional accessory.
• Character height of the LCD display has been
increased (10mm to 11mm) and a highcontrast LCD display unit adopted, so that
the readability is improved.
• Inclined handle improves slider ergonomics.

Functions

• Allows integration into statistical process
control and measurement systems.
t Refer to page A-3.
• Battery: SR44 (1 pc), 938882. For initial
operational checks (standard accessory)
• Battery life is 3,500 hours in continuous use.
• Carbide-tipped long scriber (No. 905200
with overall length of 150mm) is provided as
a standard accessory. (Standard accessory:
scriber cramp No. 05GZA033)
• For precision Black Granite Surface Plates,
refer to page E-51.

Origin-setting (ABS measurement mode):
Any arbitrary value can be stored as the origin point.
Zero-setting (INC measurement mode):
t Displayed value can be set to zero at any arbitrary
position of the slider.
Origin restoration:
t Previously set origin is restored when switching back to
ABS mode.
Presetting (ABS INC measurement mode):
t Displayed value can be set to any arbitrary value,
including negative values.
Measuring direction
t Measuring direction can be switched at the press of a
button.
Data hold
t Display value can be held. Reverts to ABS or INC mode
when cancelled.
Alarm: Error message is displayed when overflow or
overspeed of displayed value arises and measurement is
stopped.
Data output:
t Allows integration into statistical process control and
measurement systems. (Refer to page A-3.)
Fine and coarse height adjustment through knob and
wheel combination.
t Slider height adjustment wheel allows fine and coarse
height adjustment.

Coarse adjustment
Push the small fine-adjustment
knob in to disengage gearing
and then turn the large wheel.

D

Fine adjustment
Pull the fine-adjustment knob
out to engage gearing and
then turn this knob, which then
slowly turns the wheel.

Low-voltage alert:
t When battery voltage becomes low, a warning appears
in the display.
Probe-tip diameter compensation:
t An adjustment is applied to the raw measurement data
to compensate for the effect of the size of the spherical
contact point used by the bidirectional touch-trigger probe.

Presetting (2 positions)

With two preset functions, two reference heights can be
used relative to a surface plate.
• Example of preset 1
To measure a height of 70mm, with
a reference plane height of 50mm
• Example of preset 2
To measure a height of 130mm, with
a reference plane height of 150mm

SPECIFICATIONS

Metric
Order No.
Range
192-663-10
0 - 300mm
192-664-10
0 - 600mm
192-665-10
0 - 1000mm
* Excluding quantizing error
Inch/Metric
Order No.
Range
192-670-10
0 - 12"
192-671-10
0 - 18"
192-672-10
0 - 24"
192-673-10
0 - 40"
* Excluding quantizing error

Power ON/OFF button

Resolution
0.01mm
(0.005mm)

Resolution
.0005"/0.01mm
(.0002" /0.005mm)

Accuracy*
±0.02mm
±0.04mm
±0.06mm

Repeatability Max. response speed

Accuracy*
±.001"
±.0015"
±.0015"
±.0025"

Repeatability Max. response speed

0.01mm

0.01mm

500mm/s

500mm/s

Height
510mm
802mm
1228mm

Mass
5.7kg
7.5kg
8.3kg
15.7kg

150

Height-adjustment wheel
Zero set/ABS button

Mass
5.7kg
8.3kg
15.7kg

Height
510mm
649mm
802mm
1228mm

50

Preset 1
(50mm)

70
50

150
130

192-663-10

(20)

(20)

Preset 2
(150mm)

Hold/data button

Button used when
presetting and
compensating probe
tip diameter
Preset/ probe-tip-diameter
compensation mode button

Button used when presetting
measuring direction and
compensating probe-tip diameter

* Probe-tip-diameter compensation mode is a function provided for
Order No. 192-663-10/192-664-10/192-665-10/192-670-10/
192-671-10/192-672-10/192-673-10.

D-43

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.