D.200 Series Piezo Driver0 pages
n0„op.,,i„„i,0 """"
nnnnnpoint
nnnn1 ^ar iff
nnnnD.200 Series Piezo Driver
nnnnThe D.200 series is the
nnnnnewest addition to the
nnnnnPoint piezo drivers. It is
nnnnavailable in one- and two-
nnnnchannel configurations.
nnnnIt is a bench-top piezo
nnnndriver that can be operated
nnnnmanually or via the BNC
nnnnanalog input. The Gain and
nnnnOffset potentiometers are
nnnn10-turn with digital counting
nnnndials. The LCD display
nnnnshows the HV output
nnnnvoltage. The HV output can
nnnnalso be monitored through
nnnnthe BNC monitor output that
nnnndisplays a lOOx reduced
nnnnvoltage.
nnnnSPECIFICATIONS
nnnnChannels
nnnnControl input connector
nnnnControl input voltage range
nnnnInput impedance
nnnnDC offset setting
nnnnVoltage gain setting
nnnnOutput connector
nnnnOutput voltage range
nnnnPeak output current <100 ms
nnnnContinuous output current
nnnnCurrent limit
nnnnOutput noise
nnnnOutput polarity
nnnnOutput voltage display
nnnnMonitor output voltage
nnnnMonitor output connector
nnnnOperating voltage
nnnnMains maximum input power
nnnnDimensions
nnnnWeight
nnnn1 or 2
nnnnBNC
nnnnadjustable to ±5 V, ±10 V or 0 to 10 V
nnnn100 K ohms
nnnnadjustable-30 V to 150 V
nnnnadjustable xO to x30
nnnnBNC
nnnn■30 V to 150 V
nnnn150 mA per channel
nnnn80 mA per channel
nnnn150 mA per channel
nnnn< 0.4 mV rms
nnnnpositive
nnnn31/2-digit LCD
nnnnoutput voltage/100
nnnnBNC
nnnn100-240 VAC, 50-60 Hz
nnnn75 W
nnnn185 x 229 x 64 mm
nnnn2 Kg
nnnnwww.npoint.com
nnnnsales@npoint.com
nnnnsales • 608.824.1770
nnnnfax 608.824.1774
nnnn3030 Laura Lane, Suite 100
nnnnMiddleton, Wl 53562
"