TLM0 pages

Transducer
up to 4500 mm
touchless
absolute
Series TLM
with Start-Stop-, SSI-,
DyMoS-, Analogue-
Interface
Description
Housing Anodized aluminium with metal end cap
Mounting Compression clamps, longitudinally adjustable
Position marker Floating marker, plastic
Guided marker, ball coupling
Measuring technique NOVOSTRICTIVE®, touchless magnetostrictive
Electrical connection 8-pin round connector, shielded, M12x1
8-pin round connector, shielded, IEC130-9
8-conductor cable, shielded, 1 m long
Electronics Integrated SMD with ASIC
Connect cable shield to housing
Special features
• absolute transducer, no slide
arm required
• NOVOSTRICTIVE®,
touchless magnetostrictive
measuring process
• high-dynamic serial
DyMoS®-interface with data
transmission interface
• non-contacting guiding with
floating position marker
• unlimited mechanical life
• no velocity limit for position
marker
• outstanding linearity performance
up to 30 ìm
• resolution up to 0.001 mm
regardless of stroke length
• analogue interfaces with
teach-in function
• low temperature coefficient
<20 ppm/K
• insensitive to shock and
vibration
• optionally cable or plug connection
• protection class IP67 / IP68
Transducers employing the
NOVOSTRICTIVE® touchless
magnetostrictive measuring
process for direct, precise and
absolute measurement of linear
position in control, positioning
and measuring technology.
The measurement is accomplished
using a passive position
marker which can be
moved as a free-floating or
guided element.
Side coupling of the position
marker reduces the installation
envelope size, prevents
the pump effect of slide arms
and permits stroke lengths up
to 4500 mm.
The non-contact coupling
version makes installation
even simpler, and the wearfree
operation means unlimited
mechanical life expectancy
and unlimited traverse
speed of the position marker.
The temperature coefficient of
the transducer is extremely
low thanks to the measuring
principle, design and selected
materials.
The high mechanical ruggedness
of the transducer combined
with the underlying measuring
technique mean that
the system is highly resistant
to shock and vibration.
The active sensing element is
encased in an aluminum housing
rated to IP 67. This
makes the transducer resistant
to contamination, dust,
moisture and oils.
Mounting is accomplished
using clamps that allow precise
mechanical adjustment.
A sophisticated ASIC in the
transducer provides for standard
absolute output signals. In
addition to the familiar interfaces
such as the synchronous
serial interface (24 or 25 bits),
the Start/Stop pulse interface
and analogue voltage or current
interfaces, a high-dynamic
serial DyMoS® interface
with data transfer monitoring
is offered.
The advantages of conventional
interfaces and bus interfaces
have been combined
this Novetechnik DyMoS®
interface. In addition to the
position value, the DyMoS
interface also allows the actual
traverse velocity to be sent.
The pulse interface also allows
fully toleranced processing
both edges of the Start/Stop
signal.
As an option, the transducer
can also be operated with
multiple position markers.
Additional interfaces see
separate data sheet.