Road Paver AFT 270 E/G: Road Paver Tracked0 pages

Road Paver Tracked
AFT 270 E/G
The machine of this class has been designed for the use, mainly, in
small and narrow sites where its compact dimensions are required.
The traction on tracks is suitable for job sites on difficult grounds
and assures a very good levelling effect.
Applications
squares and courtyards
small building lots
footpaths
cycle tracks
trenches closure
urban centres
municipal roads and small
parking areas

steering. The hoppers are independently controlled by
an electric-hydraulic system. The front pushing rollers
move in sequence with the hoppers.

Tracked machine with rubber pads; automatic tensioning device system with grease accumulator. Hydrostatic
transmission with two variable flow rate pumps which
feed two motors with two displacements directly fastened to the planetary gearboxes which operate the
tracks. Mounted on each pump, an electronic and
proportional control gives a progressive start and stop,
keeping the set speed constant. The steering-wheel is
electronically controlled, the speed is constant when

Feeding of material
The feeding system of the material is carried out by
two independent and reverse chain belt conveyors
and augers controlled by paddle microswitches that
regulate the flow of material to the screed in order to
maintain the most effective distribution of material in
any condition. The height of the auger group is electrichydraulically adjustable.
Screed options
The FSV 270 E/G is a vibrating screed with gas or
electric heating, automatic lighting and temperature
control, ISR system (Screed Assist) with pressure adjustment.
Man on board version
Operations from one adjustable seat that can slide
left and right. The dashboard is adjustable to the seat
position to allow easy operations. Ground controls
with anti-vandal guards for the road operator. Foldable
canopy with rear supports to ensure good visibility.