NSC-3311 Servo Controller / Amplifier0 pages

high performance positioning system!

The NSC-3311 Series servo motion controller is a single-axis controller and amplifier designed for use with all Newmark servo motor stages. The controller can communicate with the host computer through an RS-232 or 10/100 Base-T Ethernet interface. With built-in high level functionality such as position tracking, contouring and teach/playback, programming the controller is greatly simplified.

The motion controller can operate as a stand-alone system through the digital I/O for synchronizing motion with external events. The NSC-3311 utilizes a 32-bit microprocessor to control the trajectory profile, acceleration, velocity, deceleration and program memory with multitasking for simultaneously running up to eight programs.

Single-axis motion controller with on-board PWM drive for brush or brushless servo motor and integrated power supply

Ethernet 10/100 Base-T and (1) 19.2kb RS232 port

Accepts encoder feedback up to 12 MHz

Advanced PID compensation with Velocity and Acceleration feedforward, integration limits, notch filter and low-pass filter.

Modes of motion include jogging, point-to-point positioning, contouring, electronic gearing and ECAM

Multitasking for concurrent execution of up to eight application programs

Non-volatile memory for application programs, variables and arrays

Over 200 English-like commands executable by controller. Includes conditional statements and event triggers.

Home input and forward and reverse limits 4 TTL uncommitted inputs and 4 outputs 2 uncommitted analog inputs (0-5V)

The NSC-3311 single-axis controller is commanded using virtually any programming language to pass simple ASCII command strings to the controller through the RS-232 or ethernet port. The command set includes conditional statements, event triggers, and math function.

The terminal software provides a user friendly interface for programming the NSC-3311.