عضویت 
ورود اعضا
راهنمای خرید
Multilayer capacitors 100A0 pages
ATC 100 A Series
Porcelain Superchip®
Multilayer Capacitors
• Case A Size
(.055" x .055")
• High Q
• Low ESR/ESL
• Low Noise
• Extended WVDC
up to 250 VDC
Capacitance Range
0.1 pFtolOO pF
Ultra-Stable Performance
High Self-Resonance
Established Reliability (QPL)
ATC, the industry leader, offers new improved ESR/ESL performance
for the 100 A Series RF/Microwave Capacitors. This is ATC's most
versatile high Q, high self resonant multilayer capacitor. High density
porcelain construction provides a rugged, hermetic package.
Typical functional applications: Bypass, Coupling, Tuning, Feedback,
Impedance Matching and DC Blocking.
Typical circuit applications: Microwave/RF/IF Amplifiers, Mixers,
Oscillators, Low Noise Amplifiers, Filter Networks, Timing Circuits and
Delay Lines.
ENVIRONMENTAL TESTS
ATC 100 A Series Capacitors are designed and manufactured to
meet and exceed the requirements of EIA-198, MIL-PRF-55681 and
MIL-PRF-123.
THERMAL SHOCK:
MIL-STD-202, Method 107, Condition A.
MOISTURE RESISTANCE:
MIL-STD-202, Method 106.
LOW VOLTAGE HUMIDITY:
MIL-STD-202, Method 103, Condition A, with 1.5 Volts DC applied
while subjected to an environment of 85°C with 85% relative humidi-
ty for 240 hours min.
LIFE TEST:
MIL-STD-202, Method 108, for 2000 hours, at 125°C.
200% WVDC applied.
ELECTRICAL AND MECHANICAL
SPECIFICATIONS
QUALITY FACTOR (Q): greater than 10,000 at 1 MHz.
TEMPERATURE COEFFICIENT OF CAPACITANCE (TCC):
+90 ±20 PPM/°C (-55°C to +125°C)
INSULATION RESISTANCE (IR):
0.1 pF to 100 pF:
106 Megohms min. @ +25°C at rated WVDC.
106 Megohms min. @ +125°C at rated WVDC.
WORKING VOLTAGE (WVDC):
See Capacitance Values Table, page 2.
DIELECTRIC WITHSTANDING VOLTAGE (DWV):
250% of rated WVDC for 5 sees.
RETRACE: Less than ±(0.02% or 0.02 pF), whichever is greater.
AGING EFFECTS: None
PIEZOELECTRIC EFFECTS: None
(No capacitance variation with voltage or pressure).
CAPACITANCE DRIFT: ±(0.02% or 0.02 pF), whichever is
greater.
OPERATING TEMPERATURE RANGE:
From -55°C to +125°C (No derating of working voltage).
TERMINATION STYLES: Available in various surface mount
styles. See Mechanical Configurations, page 3.
TERMINAL STRENGTH: Terminations for chips and pellets
withstand a pull of 5 lbs. min., 10 lbs. typical, for 5 seconds in direc-
tion perpendicular to the termination surface of the capacitor. Test
per MIL-STD-202, method 211.
AMERICAN
TECHNICAL
CERAMICS
EIH
ATC North America ATC Europe ATC Asia
+1-631-622-4700 +46 8 6800410 +86-755-2396-8759 CHOICE®
sales@atceramics.com sales@atceramics-europe.com sales@atceramics-asia.com iso 9001 REGISTERED
www.atceramics.com
ATC # 001-806 Rev. L 9/12
"
