Martindale IN21010 pages

2. PRODUCT SPECIFIC SAFETY INFORMATION
Safety: Complies with BS EN 61010 and BS EN 61557.
Overvoltage Category: CAT III 600V, Pollution Degree 2.

MARTINDALE
ELECTRIC

Specification
IN2101 & IN2102
Insulation Tester

This tester has been designed with your safety in mind, however,
no design can completely protect against incorrect use.
G Do not touch exposed wiring, connections or other live parts of
an electrical circuit.
G When using this tester to monitor high voltages, turn off the
power before connecting the tester.
G If in doubt check the circuit first before touching it.
G Do not use cracked or broken test leads.
G Do not use in wet conditions.
Note: Capacitance Discharge
On completion of an insulation test, the tester should remain
connected to the circuit under test for a short period after releasing
the TEST button. The TEST button if latched must be released.
This discharges any capacitance via the tester. Before
disconnecting the tester ensure indicated voltage is zero.
WARNING
THIS TESTER SHOULD ONLY BE USED BY A COMPETENT AND
SUITABLY TRAINED PERSON.
REMEMBER - SAFETY IS NO ACCIDENT!

Warning
Before use check the unit for cracks or any other damage. Make
sure the unit is free from dust, grease and moisture. Also check any
associated leads and accessories for damage. Do not use if
damaged.
3

General:
Digital Display: 5000 count
Overrange: OL is displayed
Analogue Bargraph: 51 segment
Low battery indication: the
symbol is displayed when
the battery voltage drops below the operating level.
Measurement rate: 2.5 times per second, nominal.
Backlight
Auto Zero & Autohold
Auto Power Off: 5 minutes
APO (Auto Power Off) disable option