MC-1000 Process Calibrator 0 pages

Calibration Technology Starts Here
The MC-1000
Multi-Function Calibrator provides the combination of a high accuracy calibrator
and common DMM functions. This single instrument will calibrate virtually any process
device — read and source thermocouples, RTDs, Ohms, Voltage, current, frequency, pressure
— and test continuity as well. The MC-1000 is compatible with both Fluke 700 Series and BETA
pressure modules with the addition of a simple connector/adapter. The MC-1000 features a simple user
interface, large display, and an RS232 interface.
High Accuracy
Multi-function Calibrator MARTEL Beta MC-1000
Accuracy
by
Any
Measure
.General Features .±0.4 °C thermocouple/±0.3 °C RTD accuracy .±0.015% of reading electrical accuracy Ten (10) T/C types and eight (8) RTD types,
.plus YSI 400 .Read and source modes Full function 4 to 20 mA read, source, simulate, and
.read/power modes with ±0.015% of reading accuracy Source or read 0 to 20 Volts (±0.015% of reading
.accuracy) .Measure 0 to 250 VDC or VAC .Direct keyboard entry enables quick output changes .Store up to nine (9) setpoints for each output function .RTD function compatible with all pulsed transmitters RS232 interface .Supplied in full rubber boot
For more information:
- Call us toll free at 800-821-0023 or 603-434-1433
- Fax us at 603-434-1653
- Email us at sales@martelcorp.com
and ask for a MC-1000 brochure
- Or go to our website, www.martelcalibrators.com
and click on MC-1000
- Online Demo