Moving Belt System0 pages
Supported By Advanced Technology
Moving Belt System
Moving belt for a large wind tunnel (Nissan Technical Center)
A wind tunnel testing machine allows the indoor measurement of the air resistance received by a moving vehicle by
creating conditions similar to actual driving. To create this environment, the equipment stabilizes the vehicle while a
large fan creates airflow equivalent to the vehicle speed and moving belts simulate road conditions at the same speed.
This method is very effective because airflow below vehicle body is close to actual running conditions on a road.
▼ Main specifications
IMoving Belt for Large Wind Tunnel
■ moving belts under the tires
Movement range of belt units
Velocity | 200 km/h or more |
Max. withstand load | 4 tons (full-scale vehicles) |
Belt width | 2500 mm |
Belt length | 6000 mm |
Unit weight | About 13 tons |
Surface flatness | 0.5 mm |
Belt material | Special steel |
▼ Main Specifications
Four belts under tires
Max. velocity | 200 km/h |
Max. withstand load | 3 tons |
Belt width | 400 mm (steel) |
Belt length | 800 mm |
Single belt below vehicle
Purpose | Supports flow of air |
Max. velocity | 200 km/h |
Belt width | 1000 mm (special plastic) |
Belt length | 6000 mm |
Total system
Unit weight | about 10 tons |
Turntable diameter | 7500 mm |
Moving belt under the body
of the vehicle
Four moving belts under the tires
MATLAB/Simulink/Stateflow are registered trademarks of The MathWorks, Inc.
Windows NT/2000/XP/Excel are registered trademarks of Microsoft Corporation.
Pentium is a registered trademark of Intel Corporation.
A
Attention to Safety!
IFor proper use, read the instruction
manuals carefully before use.
SlMULINK"
Enabled
..Clearly a Better Value
A&D Company, Limited
3-23-14 Higashi-lkebukuro, Toshima-ku, Tokyo 170-0013 JAPAN
Telephone : [81] (0)3 5391-6132 Fax : [81] (0)3 5391-6148
http://www.aandd.jp
A&D Technology, Inc.
4622 Runway Blvd. Ann Arbor, Ml 48108, USA
Telephone 1-734-822-9564(direct) 1-734-973-1111 (main) 1-734-973-1103(fax)
A&D Instruments, Ltd.
Unit 24/26 Blacklands Way Abingdon Business Park, Abingdon, Oxon 0X14 1DY, UK
Telephone 44-1235-550420 Fax 44-1235-550485
A&D Europe GmbH
lm Leuschnerpark 4, D-64347 Grleshelm, GERMANY
Telephone:[49](6155) 605 227 Fax:[49](6155) 605 100
•Appearance and/or specifications subject to change
for improvement without notice.
•Contents of this catalog last updated February 2010.
♦Moving Belt System-ADCC-01-BP1 -10202
Supported By Advanced Technology
Moving Belt System
"