Type 46 · Hydraulic single rod cylinder according to ISO 6022, DIN 24 3330 pages

KK
MM
WF
KK
KF
WF
M
M
A
MM
A
External thread, ref. no. 0
External thread, ref. no. 4
WF
Inside thread, ref. no. 1
SF
ØMM
ØMA
ØMB
KF
A
1x45∞
AS
ref. no. 2
Cylindrical,
Plain rod eye, ref. no. 5
CK
Hydraulic fluids:
Swivel head, ref. no. 8
CL
CM
ER
LE
CV
- Mineral oils, HFC, HFD liquids in combination with seals
made of PTFE and fluoric elastomeres
- HFA and HFB liquids on request
ref. no. 3
- Operating pressure: 250 bar (25 MPa)
- Test pressure: 375 bar (37.5 MPa)
- Hydraulic fluid temperature range: - 20 ... + 80 °C
- Viscosity range: (20 ... 80) 10-6 m2/s
- Piston speed: ≤ 0.5 m/s (higher speeds on request)
WL
W =15∞ bei d1 < 40
Clutch element,
W =30∞ bei d1 > 40
CE
Technical data
AE
M
M
- Standard cylinder to ISO 6022, DIN 24333
- Strokes up to 2000 mm
- Piston diameter: 40 – 320 mm
- With/without end position cushioning (with same installation dimensions)
- Two area ratios phi = 1.6 and phi = 2.0
- Construction of all mounting types by screwing-on of components (except trunnion)
- End position cushioning is precisely adjustable
- Generously dimensioned start-up check valves allow a high speed extension with
full pressure loading of the effective piston area
- The mounting type, the threaded cylindrical design and generously dimensioned
guide lengths at the piston rod and piston allow the application of the cylinders
under most severe conditions
- Different seals may be mounted on the piston and on the piston rod
Piston rod end
Description
Datasheet Type 46 · Single rod cylinder according to ISO 6022 / DIN 24333
KK
Clevis, ref. no. 9
Special design
on request!