OMM-6810B, Optical Power and Wavelength Meter0 pages

OMM
6810B
1
Specications
OMH-6700B
MEASUREMENT HEADS
POWER
MEASUREMENT
GENERAL
WAVELENGTH
MEASUREMENT
Application
Model
Aperture
Wavelength
Range
Dimensions
Range
Accuracy11,12 Range2
Accuracy
Power Only
OMH-6703B Silicon Power
Head
6mm
0.4-1.1µm
69mm (dia.) x
28mm (depth)
-40 to +30dBm
±3.0%4
NA
----------
OMH-6708B InGaAs Power
Head
6mm
0.8-1.6µm
69mm (dia.) x
28mm (depth)
-50 to +20dBm5
±5.0%6
NA
----------
OMH-6722B Silicon Power/
Wavehead
6mm
0.4-1.1µm
69mm (dia.) x
28mm (depth)
-40 to +30dBm
±3.5%4,7,8
-20 to +30dBm
±1.0nm13
OMH-6727B InGaAs Power/
Wavehead
6mm
0.95-1.65µm
69mm (dia.) x
28mm (depth)
-40 to +30dBm
±5.0%6,7,8
-20 to +30dBm
±1.0nm8, 9, 15
OMH-6732B Short Wavelength Power/Wavehead
6mm
0.35-0.53µm
69mm (dia.) x
28mm (depth)
-40 to +30dBm
±5.0%8,16
-10 to +30dBm
±0.5nm16
OMH-6780B Silicon Power/
Wavehead
2.54mm Fiber
Input
0.83-1.1µm
86mm x 86mm
x 100mm
-40 to +30dBm
±5.0%13
-10 to +30dBm
±0.2nm13, 15
OMH-6790B 10W Silicon
Power/Wavehead
2.54mm Fiber
Input
0.83-1.1µm
86mm x 86mm
x 100mm
-30 to +40dBm
±5.0%13
0 to 40dBm
±0.2nm13,15
OMH-6795B 10W InGaAs
Power/Wavehead
2.54mm Fiber
Input
1.2-1.65µm
86mm x 86mm
x 100mm
-30 to +40dBm
±5.0%13
0 to 40dBm
±2.0nm14, 15
Product Features
Optical Power
and Wavelength
Meter
Power and
Wavelength
NIST traceable calibration
Measures power and wavelength with
ILX Power/Waveheads
Integrating sphere-based power
measurements
Measurement heads cover a
wide wavelength range from
350 to 1650nm
Power measurement up to 10W
POWER DISPLAY
Type:
Power Units
Linear:
Log:
Resolution:
Power Level Meter:
Analog Power Output:
scale
WAVELENGTH DISPLAY
Type:
Units:
Resolution:
5-digit, 7-segment, green LEDs
pW, nW, µW, mW, W
dB, dBm
.001 unit (log or linear)
16-segment bar graph
0–10V, for each range, relative to full
5-digit, 7-segment, green LEDs
nm, cm-1
0.1nm
960ms (16 samples/result)
240ms (4 samples/result)
60ms (no averaging)
GENERAL
Power (50–60 Hz):
Operating Temperature:
Storage Temperature:
Humidity:
Dimensions (HxWxD):
Weight:
Warm-up:
100V, ±10%, 120V, ±10%
220V, ±10%, 240V, ±10%
15°C– 35°C
–20°C to 60°C
<85% RH, noncondensing
<70% for <100µW input
89mm x 217mm x 313mm
3.5" x 8.5" x 12.3"
2.5kg (5.5lbs)
1 hour
NOTES
1 Unless otherwise specied, all specications measured at 25°C ±3°C
after one-hour warm-up period. Fiber optic head specications
applicable for 9/125 to 110/140µm, NA = 0.3.
2. Range of input power necessary for wavelength measurement.
3. Add ±0.5% for < 0.44µm and for >1.0µm.
4. Minimum sensitivity -40dBm from 0.8–1.1µm.
5. N/A.
6. For input power >100mW add ±0.05nm/100mW to power accuracy.
7. Manually set wavelength. Add 0.5% for automatic wavelength
correction.
8. For input power >100mW add ±0.05nm/100mW to wavelength accuracy.
For wavelength <1.2µm, add ±2.0 nm to wavelength accuracy.
9. For wavelength <1.2µm, -4dBm minimum power for wavelength
measurement.
10. N/A
11. Calibrated at 21°C ±3°C, at 10nm intervals.
12. Accuracy under laboratory operating conditions.
Temperature 23°C ±3°C. Add 1% for NA >0.2. Maximum NA 0.30.
13. Typical at 980nm.
14. Typical at 1480nm ± 1.0nm.
15. This instrument’s wavelength measurement technology provides
Easy test system integration with
standard GPIB interface
ORDERING INFORMATION
Optical Multimeter (GPIB included)
Power Only Measurement Heads
OMH-6703B
Silicon Power Head
(1W Power Measurement, 400–1100nm)
OMH-6708B
InGaAs Power Head
(100mW Power Measurement, 800–1600nm)
Power/WaveHeads (Power and Wavelength Measurement)
OMH-6722B
Silicon Power/Wavehead (1W, 400–1100nm)
OMH-6727B
InGaAs Power/Wavehead (1W, 950–1650nm)
OMH-6732B
Short Wavelength Power/Wavehead (1W, 350–530nm)
OMH-6780B
Silicon Fiber Power/Wavehead
(1W, 830–1100nm)
OMH-6790B
Silicon Fiber Power/Wavehead
(10W, 830–1100nm)
OMH-6795B
InGaAs 10W High Power/Wavehead
(10W, 1200–1650nm)
Accessories
MK-650
BF-820
RM-123
RM-125
Head Mounting Kit
Bare Fiber Holder (requires either AO120 or CA-120)
Dual Rack Mounting Kit
Single Rack Mounting Kit
Note: Fiber optic adapters available on request for FC, LC, SC, ST, DIN,
and bare ber.
The only power meter that measures
power and wavelength.
For information call
31950 Frontage Road, Bozeman, MT 59715 • FAX: 406-586-9405
www.ilxlightwave.com
Free-space and ber
measurement heads
In keeping with our commitment to continuing improvement, ILX Lightwave reserves the right to
change specications without notice and without liability for such changes.
OMM-6810B
DISPLAY UPDATE PERIOD (AVERAGING)
Slow:
Medium:
Fast:
“power-averaged” wavelength (i.e., all spectral contributions are measured).
16. Add +0.5% for <0.37µm.
The OMM-6810B is the only power meter capable
of measuring the optical power and wavelength of
semiconductor lasers including short wavelength
lasers, high power pumps, and ber lasers. A variety
of measurement heads cover wavelength ranges
from 350 to 1650nm for power only or power and
wavelength measurement.
In addition to precision power and wavelength
measurements, the OMM-6810B is loaded with
standard features such as log/linear display modes, auto
ranging, user calibration, and reference measurement
capability. All of these features plus an analog output and
IEEE-standard GPIB interface combine to make this
instrument a cost-effective laser diode development or
production test tool.
1-800-459-9459
REV05.092710
OMM
6810B
Optical Power
and Wavelength
Meter