S61050 pages

4” HYDRAULIC SUBMERSIBLE
HIGH PERFORMANCE,
SOLIDS HANDLING PUMP
MODEL S6105
4” (100 mm) Discharge
The S6105 is designed for applications
where high heads and the ability to
handle solids is required. A typical use
for this pump would be as a temporary
sewage lift station where force main
pressures are encountered.

FEATURES

•
•
•
•
•
•
•
•

SPECIFICATIONS
Balanced High Efficiency Two Vane
Closed Channel Impeller
Will pass 3" (75 mm) semi-solids

WEIGHT:..................................................... 605 lbs. (276 kg)
HEIGHT:.............................................................. 36" (91 cm)
WIDTH (@ widest point):.................................... 25" (64 cm)

Variable Speed hydraulic drive provides
a wide range of performance

DISCHARGE:...................................... 4", 150# ANSI Flange

Oil Lubricated Seals (can run dry)

SOLIDS HANDLING:........................................... 3" (75 mm)

High Efficiency Balanced Vane
hydraulic motor
Can be bolted directly into a pipeline or
used as a booster pump

INLET:................................................. 4", 150# ANSI Flange

HOSE PORTS:......1-1/4" Code 61 Flange or 1-1/2" NPT (F)
PUMP BODY:...................................................... Ductile Iron
IMPELLER:.......................................................... Ductile Iron
WEAR RING........................................................ Ductile Iron
SHAFT:.............................................17-4 PH Stainless Steel

Safe Hydraulic Drive can be used where
electric power is hazardous or
impractical

SHAFT SEAL:............................................... Silicon Carbide

Operates with our HT100 to HT150
power units or other hydraulic power
sources capable of flows of 50 - 70 GPM

INPUT FLOW:................................. Max 70 GPM (265 LPM)

D0413

ELASTOMERS:................................................ Buna N (Std)
HYDRAULIC OIL:................ 214-320 s.s.u. @ 100°F (64°C)

OPERATING PRESSURE:............. Max 2500 PSI (170 Bar)
POWER SOURCE:....... Any Open Center Hydraulic System
Specifications are subject to change without notice

167 Stock Street, Nesquehoning, PA 18240 Phone: 570-645-3779 Fax: 570-645-4061
Website: www.hydra-tech.com
E-Mail: htpump@hydra-tech.com