SUMICON 1600 SERIES RECTANGULAR CONNECTORS0 pages

105
SUMICON 1600 SERIES RECTANGULAR CONNECTORS
The SUMICON 1600 series are multi-contact connectors
designed by Hirose. 8, 12, 16, 20, 24, 28, 34, 45
and 60-contact models available (same as the 1300
series). The connector units are available in three
types: soldering, wrapping, and crimping. Accessories
are C case, CA case, CBA case, ST stopper, STA stopper,
and STB stopper, By combining the many options
noted above, the SUMICON 1600 series connectors
meet a wide variety applications.
In the SUMICON 1600 series, the connector unit is
completely separated from the accessories such as the
cases and stoppers to diversify the specificaions and
facilitate wiring connection. The SUMICON 1600
series are specified in the NTT specifications No.1931.
Standard Type
General
(1) Shape of terminal opening
P: Male terminal
S: Female terminal
(2) Terminal connection method
No sign: Soldering
W: Wrapping C: Crimp
(3) Series No.
16: 1600 series
(4) Number of contacts 34: 34 contacts
(5) Serial sign for connctor units
Provided with a sequence of upper-case alphabetic characters.
No sign or sign other than W: Soldering
Sequence: No sign, B, C, D, E ...
(6) Plating
A: Silver-plated
G: Gold-plated
(7) Signs for accessories
C: Plug case
ST: Stopper bracket with horizontal cable inlet opening
J: Jack Case
H: Handle
DB: Deep bracket
(8) Serial signs for accessories
Each accessory (C, ST, J, H, DB) is provided with sequence of
upper-case. alphabetic characters.
Sequence: No sign, A, B, C...
Accessories, C, ST, or J followed by Òno signÓ: Side lock
types
Accessories, C and ST followed By A: Top touch lock type
Note: The space for no sign is filled sequentially.
(9) Special specification, ( ) is filled with a serial number,
except for the case and bracket, for which the following apply.
(51): Bracket only
(50): Case only
Ordering Information
P W | 16 34   A | C   i j
(1) (2) (3) (4) (5) (6) (7) (8) (9)
Electrical Characteristics
Item Standard
Contact
Resistance
7mÙ max.
at DC 1A
Insulation
Resistance
1000MÙ min.
at DC 500V
Withstand
Voltage
AC 1000V for 1 minute
Current Rating 3A
Voltage Rating 300V AC
Part
Insulator
Male Terminal
Female Terminal
Plug Case
Stopper Bracket
Material
Glass filled
diallylphthalate resin
Brass
Phosphor bronze
ABS resiniblackj
Steel
Finish
Blue
Type A: Silver-plated
Type G: Gold-plated
NTT spec: ABS resin,
2.5PB 6.0/2.0icolorj
Nickel plating
Applicable
wire
AWG
Applicable
wireimmj
Max. coating
O.Di. mmj
26
0.41
0.95
Ordinary
wrapping
about 8
2 wrap
28
0.32
0.75
Coating
one wrap
about 8
30
0.26
0.6
Coating
one wrap
about 9
Wrapping method
Effective number of wrappings
Number of wrappings
per terminal
Material and Finish
Wire Wrapping Specifications
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
04/2009