Gremo HPV R0 pages

Technical data Gremo HPV R
Length: 7,490 mm
Width (machine tted with 600-mm
tyres): 2,600 mm
Ground clearance: 580 mm
Height for transport: 3,445 mm
Weight: 13,970 kg
Fuel-tank capacity: 330 litres

Combining economics and ergonomics—the ideal climate for growth

The excellent visibility from the cab
enables the operator to keep his eye on
the harvester head throughout its travel.
And thanks to the rooight, he can
always see the crown cover and
therefore select the right trees for
thinning.

As part of its commitment to improved
ergonomics, Gremo has incorporated
many features into the design of the
HPV, some of which are not instantly
apparent. However, the operator will
be very aware of them after a few
days in the woods. One is the low
noise level inside the cab. In fact, it is
quieter inside the HPV cab than in a
car cruising on the motorway. It is
this attention to detail in the design
of the machine that enhances the
wellbeing of the user, and contributes
towards high productivity.
Of course, every user has his own
preferences and requirements, which
is why no two Gremo HPVs look
exactly the same. But the fundamentals don’t change. All the machines are
built to the same basic design, with
the cab and crane mounted on the
same chassis frame. They all have
eight wheels and a low centre of
gravity, giving the machine
exceptional stability when operating
on steep downhill slopes and in tough
terrain.

Forest land can vary from one extreme
to another, but one thing is certain: the
going is never at and even. However,
thanks to bogies on all wheel pairs, the
HPV condently negotiates the toughest
terrain. No wonder so many operators
can’t wait to take the machine off-road!

The HPV is a exible machine, which
our customers come to appreciate
many times over. It is nimble enough
for efcient thinning work but also
powerful enough for all but the largedimension nal fellings.

Standard equipment
Compressor and air gun.
24 V power socket at fuel tank.
Hydraulic ladder.
Bogie lift, with separate controls for left
and right sides
Articulated-joint and bogie locks on
engine unit (applied automatically when
Neutral selected)
Drive on boom unit can be engaged/
disengaged when machine moving
Sprinkler system and two manual re
extinguishers
Towing lug at front. Draw-bar at rear.
Speedometer and odometer.
Three separate tool compartments.
Two include equipment for stump
treatment.
Special tools
Vacuum pump
Tyres: 600/50 x 22.5 Trelleborg
Engine pre-heating

Clear view of all wheels and all tree
tops. With the cab mounted on the
bogie, the operator has excellent sight
of the close-in work. And because the
crane is mounted on the same
section, he is also able to keep a
much better eye on both the crane
and the harvester unit in thinning—
thus reducing damage to the retained
trees. What’s more, he enjoys a
smoother ride, which soon results in
noticeably improved performance all
round.

Engine

Eight wheels increase the ground bearing capacity and give

Power-assisted steering wheel
Electric proportional off-road steering
via boom control.
Steering effort: 42 kNm maximum
Steering angle: ± 43°
Outer turning radius:
– with bogie raised: 6,350 mm

Braking system
Four multidisc brakes running in oil
bath in front and rear differentials
Braking effort: 136 kN
Parking and emergency brakes acting
on all disc brakes and applied automatically when Neutral selected.

Working hydraulics
Constant-pressure load-sensing
hydraulics system (totally independent
of hydraulics for hydrostatic
transmission)
Variable pump: 135 cc
Working pressure: 240 bar
Separate 200-litre reservoir with electric
ller pump via lter.
Separate radiator with thermostatically
controlled hydraulic fan.

Electrical system

Perkins 6-cylinder turbo with watercooled intercooler. Total volume: 6.0 l.
Torque: 695 Nm at 1400 rpm
Rating: 129 kW (175 bhp) at 2100 rpm
Two separately adjustable constantspeed devices.
Electrical controlled injection.
EC step 2 approved.

Voltage: 24 V
Battery capacity: 2 x 750 A starter
current
Alternator: 75 A
Working lights: 30 x 70 W
Vehicle lighting system meeting road
trafc regulations

the machine a softer footprint. Suddenly rough terrain can be
taken in one’s stride and the job can be done more efciently.

Transmission/axles
Hydrostatic drive with electronic
power control
Separate hydraulics system totally
independent of working hydraulics
Reservoir with electric ller pump via lter
Cast pinion-drive bogies with hub reduction
Two-stage Powershift gearbox:
Stage 1: 0–9.1 km/h
Stage 2: 0–25 km/h
Transmission power: approximately 12
tonne net
Independent electrically operated differential lock with 100% locking.
Pedals for forward/reverse and road speed
Warning system displays error messages
in text together with acoustic/optical alarm
Computerized fault diagnosis

Standard boom
Loglift 181 V
Outreach: 10.0 m
Lifting moment: 138 kNm (gross)
Joysticks
Boom control with memory settings
for four operators. All settings are
entered via a keypad and are displayed
(as are error messages) in plain text.

Cab
ECC climate-control system
Widescreen tinted rooight
Rear windows, rear side windows of
19 mm Lexgard.
Front windows and front side windows
of tinted glass.
Intermittent wipers on front and rear
screens. One-touch button for single
sweep. Wiper on rooight.
Air-sprung and electrically heated operator seat with seat belt and headrest.
Electric brake on seat swivel mechanism.
Radio/CD player with four speakers.
Rear-view mirror and sun visor
Antenna and provision for installation
of phone.
12 & 24 V power sockets in cab.

Accessory & equipment options
Alternative boom outreach: 11.1 m
Alternative harvester units: SP451; LogMax 3000 & 5000
Stump-treatment equipment
Indicator colour (stump treatment)
Crane tilt with automatic levelling
Crane damper
Tilting operator’s seat
Sun blinds
Four extra tool boxes
Tyres: 710/40 x 22.5 Trelleborg
Wear guards on bogie boxes
Xeon workinglights
Special requirements? Let us know!

We retain the right to alter designs or
specications without prior notice. Machines
pictured may include optional equipment
and accessories. All values, measurements
etc. are approximate.

the machine exceptional lateral stability, which means it can
operate with maximum precision even in the roughest terrain.

World-class forestry machines
Gremo AB • Box 44 • SE-310 61 Ätran
Phone: +46 346-605 15 • Fax: +46 346-603 42
info@gremo.se • www.gremo.com

Grows with the forest

SP 551 LF II with maximum felling diameter of 600mm, maximum limbing
diameter 430mm, Poclain 514, 560 or
926cc roller motors, automatic chaintightening device SC100, autocut,
loghold, quickcut, proportional
pressure on delimbing knives and feed
rollers adjustable from DASA4.
DASA4 with 10,4” touch screen, sealed
keybord with integrated pointing device
and IR communication with computer,
prepared for GPS E-mail mm.

The low mounting of the boom gives the HPV an extremely
low centre of gravity. Together with locking bogies, this gives

HPV R

Harvesting head/measuring system

040519

Steering

Gremo HPV R UK

Dimensions