Synthesizer Modules SNY-0410-510-010 pages
Wideband Low Noise
Synthesizer Module
4.0 TO 10.0 GHZ
FEATURES
APPLICATIONS
Wide Frequency Coverage
Compact Size
Low Phase Noise & Spurious
Ideal for ATE
Frequency Converters
SatCom
Telecom
DESCRIPTION
The SNY-0410-510-01 is a low noise, wide tuning range synthesizer in a compact chassis suitable for
VXI or PXI applications. Extremely cost effective for the frequency coverage, this unit provides phase
noise and spurious response that is unmatched in wide-band VCO based synthesizers. An optional
feature is for the last frequency set prior to power turn-off being the start-up frequency at power turn-on.
Model #
Units
Parameters
General
Nominal Frequency Range
Tuning Step Size
Power Level
Power Variation (Freq & Temp.)
Harmonic Level
Spurious Level (> 100 kHz from Carrier)
Switching Speed
Output Impedance
Phase Noise
SNY-0410-510-01
Specification Limit
GHz
kHz
dBm, min.
dB, max
dBc, typ
dBc, max
mSec, typ.
Ohms
4.0 to 10.0
250
14
+/-2
-12
-70
50
50
Offset Freq.
Typical
Maximum
SSB Phase Noise
100 Hz*
1 kHz*
10 kHz
100 kHz
1 MHz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
-70
-80
-94
-120
-143
-65
-75
-88
-116
-139
Frequency Reference
External
PowerLevel
Input Impedance
MHz
dBm
Ohms
10
0 + 3 dB
50
Serial
TTL
Serial TTL/CMOS
16 bit Binary Channel, 3 wire
(Preceeded by ASCII "C")
High=Lock
Amps, typ.
Amps, typ.
0.8
0.20
Degrees C
% RH, max
Feet ASL
Oz., typ
Inches
0 TO +60
95
10,000
12
2.56 x 4.00 x 0.80
Digital Interface
Tuning Format
Serial Bits
Phase Lock Indicator
DC Power
Volts = +15.00
Volts = +5.00
Packaging & Environmental
Operational CaseTemperature
Humidity
Altitude
Weight
Size (See attached envelope drawing)
* Phase Noise at 100 Hz and 1 kHz is dependent on the performance of the 10 MHz reference signal.
_____________________________________________________________________________
1269 Corporate Center Parkway, Santa Rosa, CA 95407.
Contact Information: Direct Phone: 925-328-4650, Fax: 925-328-4700
www.gigatronics.com inquiries@gigatronics.com
Form D12FJ1