68
Ø106.5
106.5
275
312
Ø 31
• Adapters for use of allen DIN EN ISO
4762 (12.9 quality) instead of
threaded mandrels M4 to M8
• Adapters for setting of blind rivet nut
studs M4 to M8
• Nosepieces and threaded mandrels
with UNF/UNC threads
• Complete sets of nosepieces and
threaded mandrels.
Spécial accessories
Threaded mandrel and nosepiece from
M3 to M12 as per customer’s choice
Standard equipement
2 wrenches SW24/27
1 allen screw driver SW4
1 oil can with 100ml hydraulic oil
1 oil refilling can
Operation manual
Standard Accessories
Weight:
2,4 kg ( 4,4 lbs)
Course, ajustable, max:
10mm
Traction force, ajustable max:
18,5 KN bei 5 bar
Operating air pressure:
5-7 bar
Air hose connection:
6 mm Ø (1/4’’)
Air consumption:
Approx. 2 to 4 l
per cycle (depends of nut size)
Technical Data
From M3 to M12 all materials
Working range
Performances
Ø 50
217.5
FireFox ® — The complete range
Great care has been taken to shorten every sequence of the setting cycle to its absolute minimum: Pulling sequence
and subsequent automatic drill-off take place at breathtaking speed and require only a single action on the trigger.
FireFox® — The fast one
Extremely fast working cycle
The drill-on process will automatically start when a blind rivet nut
is lightly pressed onto the mandrel tip. This avoids the cumbersome
double action on twin triggers. Thereafter introduce the blind rivet
nut into its setting hole, press the trigger and keep it depressed until
the setting cycle is completely finished, nut drilled off and tool free. It
couldn’t be easier!
Easy operation through automatic drill-on function
FireFox® — The simple one
This means that the tool will pull the blind rivet nut with its maximum
force and stop immediately when the pre-adjusted stroke has been
covered, nut for nut, safely and reliably. The stroke adjustment is easily
and clearly performed using a millimetre scale on the tool adjustment
thumb wheel, without the need for any tool, after having adjusted the
pulling force to its maximum. The millimetre adjustment scale exactly
reflects the effective stroke of the threaded mandrel, so that maladjustment is nearly impossible. Moreover it is safely locked to prevent any
drift.
The protruding length of the threaded mandrel can be adjusted manually according to the shaft length of the blind rivet nut.
Setting blind rivet nuts with constant stroke
adjustment
FireFox® — The reliable one
This means that the tool will stop pulling the blind rivet nut when a pre-adjusted
traction force threshold is reached. No re-adjustment is needed when setting
blind rivet nuts into different material thicknesses or when using blind rivet nuts
with different shaft lengths. Traction force control prevents damage of the material
which cannot be overstressed by a too high setting pressure and preserves the
integrity of the blind rivet nut thread. As a bonus, it also extends the life duration
of the threaded mandrels.
The desired traction force threshold can be very simply adjusted with an allen
wrench once the stroke adjustment has been set to the maximum.
Setting blind rivet nuts with traction force adjustment
GESIPA® not only offers threaded mandrels and nosepieces for
the current thread sizes M3 to M12, but also adapters for blind
rivet nut studs from M4 to M8.
This range of threaded mandrels and nosepieces is also available with equivalent UNC/UNF thread dimensions.
All these parts can be ordered separately, either individually or
in complete sets. They are not included in the standard delivery
of the tool.
The FireFox® special accessories
FireFox® — All inclusive
The wide range of suitable thread sizes provides the FireFox®
with a large variety of possible operation. The choice between stroke and traction force control also makes it suitable
for industrial applications where several material thicknesses
need to be covered, which would normally require the use of
several tools.
Moreover, its outstanding 10mm stroke is ideally suited to the
new generation of large grip range blind rivet nuts, like the
GESIPA® PolyGrip® products.
Sets blind rivet nuts from M3 to M12, also
those with extended grip range.
FireFox® — The versatile one
Special adapters available as accessory for M4 to M8 threads
allows the original threaded mandrels to be replaced by allen
screws: a substantial cost saving without any quality or performance loss and higher endurance when far away from the spare
parts source. Best results are obtained with 12.9 grade screws.
… can be operated with DIN EN ISO 4762 allen
screws instead of threaded mandrel.
FireFox® — The canny one
Most blind rivet nut setting tools on the market are stroke controlled, while only a handful are
traction force controlled. GESIPA® now offers both features together in a single pneumatic-hydraulic
tool and provides the user with the choice between both setting modes: easy, fast and safe!
FireFox® — The new one
This new tool doesn’t come alone. GESIPA® is offering a comprehensive range of accessories in
order to cope with special applications and difficult tasks: easy, fast and safe!
FireFox ® — Just innovative!