Fact Sheet

PRO E-Cell* EU Series
Integrated RO/EDI Machines 10 to 23 m3/h 50 Hz
Options

HART protocol instruments

Accessories

Features

RO and EDI systems on common skid
2 pass RO with interpass caustic injection
RO Pump VFDs and EDI Power control/DC Drive
mounted on skid
RO permeate flush sequence on shutdown and
divert to drain on startup
Siemens control system with Simatic PLC and
HMI interface
CE certified

PRO E-CELL EU Clean-in-Place unit
PRO Multi-Media filters
PRO Activated Carbon and Softeners
PRO Chemical Feed Systems
Transfer Pumps and Storage Tanks

Operating Parameters
Design Recovery RO ............... 75% Pass 1; 85% Pass 2
Design Recovery EDI ................................................. 90-95%
Design Temperature ....................................................... 15ºC
Operating Temperature Range ............................. 5-29ºC
System Inlet Pressure ................................................ 2-4 Bar
1Recovery

Rate can vary +/- 5%

Instrumentation

Materials of Construction

Flow Meters............... RO Permeates, RO Concentrates
EDI Product, EDI Concentrate, EDI Electrode
Pressure Gauge..................... Pre & Post Cartridge Filter
Primary, Final, Interstage, RO Permeate,
RO Concentrate, RO Pump Discharge, EDI Feed, EDI
Product, EDI concentrate, EDI Electrode, EDI Dilute
Feed
Pressure Switch....................... RO Feeds, RO2 Permeate
RO Concentrates
Pressure Transmitter ..................... RO Primary, RO Final
RO Permeate, EDI Product, EDI Concentrate,
EDI Electrode, EDI Dilute Feed
Conductivity/Temp ..... RO Feed, RO1 Permeate, EDI
Product (resistivity)
pH Meter ........................................... RO Feed (both passes)
ORP ................................................................... RO Feed pass1

High-pressure piping ................. 1.4404 Stainless Steel
Low-pressure RO & EDI piping ....................... DIN PVC-U
EDI dilute piping .............. DIN Standard Polypropylene
Frame ...................................... Epoxy-coated carbon steel
Enclosure ............................................................................... IP54
Fasteners/Victaulic ............................................ Zinc-plated

Membrane Elements and Housings
Membrane elements........................................... GE AK-400
Average membrane flux ............................. 22lmh pass 1
33lmh pass 2
Membrane rejection..................................... 99.0 to 99.5%
Housing material ................................................... Fiberglass
Housing Pressure Rating ......................................... 31 bar

Find a contact near you by visiting www.gewater.com and clicking on “Contact Us”.
* Trademark of General Electric Company; may be registered in one or more countries.
©2013, General Electric Company. All rights reserved.
E-FSroPRO_E-Cell_EN.doc Sep-13