S184PM-SLDF/S183PMII ver.2 Advanced Fusion Splicer0 pages
FUSION SPLICERS
S183PMII
ver.2
/S184PM-SLDF
S183PMII ver.2 Fusion Splicer
S184PM-SLDF ver.2 Fusion Splicer
ver.2
NEW
- A New Standard in the Field for High-End/
Super High-End Fusion Splicing Applications
RoHS
•t Features of ver.2
1. Optimization of rotational adjustment for PANDA fiber
2. Intuitive manual splicing
3. Splicing dissimilar fiber mode
•t Splicing various types of fibers
(
Similar/Dissimilar, Dissimilar cladding, Polarization, t
High-strength, Very large diameter)
•t Intuitive GUI interface
•t Interlocking of measuring instrument
•t
Improving reliability and productivity for manufacture
optical component
Features and applications
Speciality Splicing Mode Easy
The advanced features of S183PMII and S184PM-SLDF
allow you to splice today’s and tomorrow’s most exotic
fiber types. Whether performing high-strength splices,
splicing small cladding fibers (80 μm), large cladding fibers
(S183PMII: 500 μm, S184PM-SLDF: 1200 μm), PM fibers or
erbium doped fiber, S183PMII and S184PM-SLDF are the
splicer for your high-end application.
Dissimilar
Dissimilar cladding
PANDA fiber
Quick Loading & Automatic Machine Adjustment
S183PMII and S184PM-SLDF automatically adjust for different
fiber coating and cladding sizes. There is no need to exchange
v-grooves, or fiber clamps. In addition, S183PMII and S184PMSLDF have been designed so that the user simply loads the fiber
and closes the lid to begin the splice process. There is no need
to lower or set fiber clamps before beginning your splice.
Automatic Fiber Holder Release
S183PMII and S184PM-SLDF automatically perform a tensile
proof test on the fiber and releases the holder lid to avoid
twisting the fiber after the splice. This automation eliminates
the need for the user to manually open and reset the splicer
after each fusion splice.