Dispersing machine MS0 pages
Fluid Kotthoff GmbH
Mixing Technology
Dispersing machine MS
Stirrer design
The MS dispersing machine is a high shear rotor-stator disperser primarily
designed for tank mounting where energy intensive mixing
in batch operation is required. The stirrer shaft is mounted directly on
the drive shaft of the electric motor, which ensures a minimal
weight and a compact configuration. The stator is mounted on a cage
which can be attached directly to the motor or a mounting flange.
Specially configured machines are available for operation in potentially
explosive atmospheres, according to European ATEX standards.
Drives
3 phase motors are available for numerous voltages, frequencies and
tolerances. The motors are IP55 in standard configuration.
Machines are available with 3000, 1500 and 1000 rpm at 50 Hz.
Continuous speed controlis also available with frequency
inverters. All machines are designed for continuous industrial application.
Machine mounting, shaft seals
For non-pressurised tanks, the dispersing machine can be mounted using
the stator cage flange or a mounting flange. For pressurised or
vaccuum processes, special seal flanges and seal housings are available
tailored to the specific applications. The machine configurations
are highly adapdable for a wide range of operating conditions. Rotary lip
seals or mechanical seals are chosen to best suit the individual
customer needs. The MS dispersing machine is available in top, side or
bottom-mounted variants.
Mixing head
The rotor-stator mixing assembly are supported solely on the mounting flange.
This means that in the top-mounted configuration, there are no
seals or bearings in contact with product. This is especially advantageous with
sensitive or abrasive products as the risk of product contamination
can be minimised.
Materials
The stirrer shaft, the mixing head and the stator cage are all produced in
stainless steel 1.4571 (SS316Ti). Other weldable materials are availablel on request.
Accessoires
Suction or feed pipes, mounting flanges, seal monitoring systems, lifting stands, complete tanks.
Dispersing machine MS
Page 1 of 2
Daniel-Eckhardt-Str. 44 · D-45356 Essen
Telephone +49 (0)2 01 8 35 73-0 · Fax -20
Fluid Kotthoff GmbH info@fluid-kotthoff.de · www.fluid-kotthoff.de