LOADING
Electrochemical type Battery operable Long life0 pages
نسخه متنی
"
"
PRODUCT INFORMATION | |||||||||||||||||||||||||||||||||||||||
TGS 5042 - for the detection of Carbon Monoxide | |||||||||||||||||||||||||||||||||||||||
Features: * Battery operable * High repeatability/selectivity to CO * Linear relationship between CO gas concentration and sensor output * Simple calibration * Long life * UL recognized component * Meets UL2034, EN50291, and RoHS requirements | |||||||||||||||||||||||||||||||||||||||
Applications: * Residential and commercial CO detectors * CO monitors for industrial applications * Ventilation control for indoor parking garages * Recreational vehicle CO detectors * Marine CO detectors * Fire detection | |||||||||||||||||||||||||||||||||||||||
Figaro's TGS5042 is a battery operable electrochemical sensor which offer several advantages over traditional electrochemical sensors. Its electrolyte is environmentally friendly, it poses no risk of electrolyte leakage, can detect concentrations as high as 1% CO, operates in a range from -40° and +70°C, and it has lower sensitivity to interferant gases. With a long life, good long term stability, and high accuracy, this sensor is the ideal choice for CO detectors with digital display. OEM customers will find individual sensors data printed on each sensor in bar code from, enabling users to skip the costly gas calibration process and allowing for individual sensor tracking. TGS5042 utilizes a standard AA battery-sized package. | |||||||||||||||||||||||||||||||||||||||
The figure below represents typical sensitivity characteristics, all data having been gathered at standard test conditions (see reverse side of this sheet). The Y-axis shows theoutput current of the sensor (Iout/^A) in each gas. Output current is linear to CO concentration, with a deviation of less than ±5% in the range of 0~500ppm. | The figure below represents typical temperature dependency characteristics. The Y-axis shows the sensor output ratio (I/Io) as defined below. The linear relationship between I/Io and CO concentration is constant regardless of the CO concentration range. I = Sensor output current in 400ppm of CO at various temperatures Io = Sensor output current in 400ppm at 20°C/50%RH Temperature Dependency: | ||||||||||||||||||||||||||||||||||||||
Sensitivity Characteristics: | |||||||||||||||||||||||||||||||||||||||
2.0 | |||||||||||||||||||||||||||||||||||||||
2.0 | |||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||
1.5 | |||||||||||||||||||||||||||||||||||||||
1.5 | |||||||||||||||||||||||||||||||||||||||
1.0 | |||||||||||||||||||||||||||||||||||||||
1.0 | |||||||||||||||||||||||||||||||||||||||
0.5 | |||||||||||||||||||||||||||||||||||||||
0.5 | |||||||||||||||||||||||||||||||||||||||
0.0 | |||||||||||||||||||||||||||||||||||||||
-0.5 | |||||||||||||||||||||||||||||||||||||||
0.0 | |||||||||||||||||||||||||||||||||||||||
0 | 200 | 400 600 Gas concentration (ppm) | 800 | 1000 | |||||||||||||||||||||||||||||||||||
-40 -20 | 0 20 Temperature fC) | 40 | |||||||||||||||||||||||||||||||||||||
60 | |||||||||||||||||||||||||||||||||||||||
IMPORTANT NOTE: OPERATING CONDITIONS IN WHICH FIGARO SENSORS ARE USED WILL VARY WITH EACH CUSTOMER'S SPECIFIC APPLICATIONS. FIGARO STRONGLY RECOMMENDS CONSULTING OUR TECHNICAL STAFF BEFORE DEPLOYING FIGARO SENSORS IN YOUR APPLICATION AND, IN PARTICULAR, WHEN CUSTOMER'S TARGET GASES ARE NOT LISTED HEREIN. FIGARO CANNOT ASSUME ANY RESPONSIBILITY FOR ANY USE OF ITS SENSORS IN A PRODUCT OR APPLICATION FOR WHICH SENSOR HAS NOT BEEN SPECIFICALLY TESTED BY FIGARO. |