عضویت 
ورود اعضا
راهنمای خرید
VACUOPEEL?PA90 PES3400 pages
VACUOPEEL™
PA90 PES340
DIATEX Vacuum Moulding Complex
Vacuum
moulding
DESCRIPTION
VACUOPEEL™ is a multilayer system (without adhesive or glue)
used in manufacturing processes for vacuum moulding of
composite materials with techniques such as prepreg, wet lay-up,
and thermoplastic. VACUOPEEL™ is a “smart complex” which
gives many benefits to the producers : save time, improve the
composites quality, one product to buy instead of 3, one product to
apply instead of 3. This “economic” version is made with PA64 peel
ply, a nylon peel ply which leaves a very fine surface impression.
PA64 is designed to be used on epoxy composite systems.
During the curing process, VACUOPEEL™ removes the gases and the excess of resin more efficiently
than the traditional method. VACUOPEEL™ is an evolution of the VACUOPLEX™ developed in 1991 :
the only difference is on the fact that you can remove the VACUOPEEL™ in 2 times after the curing
process :
1. you remove the bleeder and the perforated film.
2. you remove the peel ply. With VACUOPEEL™ you can keep the peel ply on the part in order to
protect the laminate against all the pollution during its storage.
DIATEX proposes different versions of VACUOPEEL : a VACUOPEEL for each application.
STORAGE
Keep this film at room temperature and normal hygrometry.
CHARACTERISTICS
Perforated Film :
Color
Weight
Auto release
Pink + stripes
83 g/m²
YES
Raw
material
Copolymer
Perforation
Auto release
P
YES
Bleeder PES340 :
Raw material
Polyester
Colour
White
Weight
340 gr/m²
Aspect
Non woven
VACUOPEEL PA90-PES340 :
Color
Thick.
Weight
Temp maxi
Width
Length
White
+/- 6mm
470 g/m²
150°C
1,50 m
50 m
Air porosity
100Pa
200Pa
VACUOPEEL
3 components applied manually
2.22 l/m²/s
3.18 l/m²/s
3.60 l/m²/s
5.21 l/m²/s
Composite Process Materials - +33 478 868 500 - www.diatex.com
Indice C Application date october 2012
Peel Ply PA90 :
"
