RECYCLING-Drivers0 pages

Screwdriving technology

Automation

Air motors

Air tools

RECYCLING Drivers
r
rive
d
rewfor s
c
ld S atic ation
he
nd neumpplic
Ha p al a
ci
pe
s

For the easy disassembly
prior to recycling and repair
n perfectly balanced and
ergonomic handle
n economical
n durable
The RECYCLING screwdriver is a specially designed tool for repair- and recycling
operations.
Especially when recycling electronic scrap
material, a mechanical disassembly is
required prior to the handling of chemical
and thermal material.
In most cases that requires the loosening
of different screws.
The big challenge for a screwdriver is:
• to engage the screw drive with a bit

• to apply the required down-pressure
right from the start, to avoid cam-out or
ratcheting
• to reach a higher loosening torque and
therefore breakaway if screws are rusted,
etc., which has a direct impact on the
operators hand
The ergonomic housing grip is designed
in accordance with the newest OSHArequirements and helps to absorb the torque reaction force. Furthermore, the lower
housing flares out [bell bottom] to simplify
the required push-to start.
According to the required drive direction
and the most positive support-grip, a technical clean solution is:

RECYCLING screwdriver
for horizontal disassembly:
For the horizontal disassembly we recommend the use of a screwdriver without
clutch in pistolgrip design.
The screwdriver is started by an ergonomic
trigger. The bit change is done by an integrated quick change chuck.
The RECYCLING screwdriver operates as
follows: Set driver, engage bit, push trigger
and tool will start and screw-connection is
loosened.
Backout torque reaction can easily be
absorbed by the pistolgrip form.
RECYCLING screwdriver
for the vertical disassembly:
For the vertical disassembly we recommend the use of a reversible screwdriver
with straight design.
The start occurs in 2-steps.
Possible backout torque reaction is limited
by the adjustable, left-rotation safety-clutch.
The bit change is done by an integrated
quick change chuck.
The RECYCLING screwdriver operates
as follows: Set driver, apply small downpressure to engage bit with screw drive at
reduced speed, apply full down-pressure
and disassemble fastener.
D 3530 E 09.2014