Combinable Modular Cabinet | delvalle0 pages
METAL
>COMBINABLE MODULAR CABINET
The combinable modular cabinet system from delvalle, is totally
flexible and adaptable to any application, especially designed for
distribution panels and switchgear, our system comprises a closed
section manufactured in galvanised steel, with two delivery
possibilities; welded for greater robustness, or dismounted for
greater flexibility, with removable screw in uprights, all doors are
detachable with 120º'ba opening, and can be reversible and
transparent.
Versatile robust assembly for different uses.
With this cabinet system sliding, rotating or fixed galvanized
plates can be fittedWhen joining the modular cabinets, they can
be transported by means of a lift support using eyebolts and if
the load is heavy with few longitudinal transport profiles.
The cabinet composes the following components
• 4 closed upright profiles in galvanized steel.
• Closed rigid 1.5 mm thick profiles and frame welded around
the doors.
• Structure completely welded to the upper and lower base, which
gives strength and rigidity to the assembly. Available dismounted.
• Removable doors with handle with up to 4 latching points per
door and / or double-bit closures system.
• The side and rear panels are removable by means of the screws.
• The cabinet system is fitted on each one of the doors or
polyurethane joint panels, with three or four point fixed point
that guarantee a very high degree of protection.
• Door opening rotation of 120 º'ba.
IP55 Protection galvanised steel assembly systems with
different fastening systems: Fixed, sliding or rotating.
• Plinths are removable. Heights available 100 and 200mm.
• Hinges, mounts, guides, nuts and bolts, with electrolytic zinc
coating.
• Any width, depth and height can be manufactured, available
for quick delivery.
• Adapted and customized with holes and cut-outs on each of the
doors, plates or trays.
Available in Textured RAL Grey 7032 or RAL Grey 7035 or any
colour on demand.
Allows low-voltage installation assembly, for motor control centre,
low-voltage electrical distribution.
Solutions:
• Any depth, height and width can be manufactured.
• Partial doors, different doors can be made for any frontal; blind
or transparent.
•Separation profiles, any inner piece can be manufactured on
demand.
• Trays for modules or separation walls.
• Doors are available with approved tempered glass or
polycarbonate.
Paso el Prao Nº 6 - 01320 Oyón
Phone: +34 945 601 381
+34 945 601 354
Fax: +34 945 601 693
E.mail comercial@delvalle.es