160 SERIES RELAY - GENERAL PURPOSE0 pages

10
160SERIES 5 AND 13 AMP
GENERAL PURPOSE
PLUG-IN RELAY
FEATURES
Class F Coil Insulation System for 155°C Total Temperature
Coil Molded in DuPont Rynite® for Environmental Protection
Unique Armature Stop Maintains Adjustment
Fine Wire Gauge Coils are Skeined for Coil Integrity
CONTACT DATA
CONFIGURATION:
Thru 3PDT
MATERIALS:
5 AMP:
1/8" Diameter Moveable Fine Silver
3/16" Diameter Stationary Fine Silver
13 AMP:
3/16" Diameter Moveable Silver Cadmium Oxide
3/16" Diameter Stationary Fine Silver
Gold Flash Standard on All Contacts
Gold Diffused Available on Special Order – Min. Qty. Req’d.
CONTACT RATINGS
MODEL POLE UL CONFIGURATION RATINGS
5 amp or 1/8 HP at 120VAC
160/165 thru 3PDT 5 amp or 1/4 HP at 277VAC
2 amp at 600VAC
5 amp at 28VDC
13 amp or 1/3 HP at 120VAC
13 amp or 1/2 HP at 277VAC*
10 amp at 28VDC
161/166 thru 3PDT 1 HP at 277VAC - 3 phase
3 amp or 3/4 HP at 600 VAC
12 FLA, 35 LRA at 15VAC
166E thru 3 amp at 150VDC DPDT 30,000 cycles (wM/Balgonweotut) Form X, Y, 10 amp at 150VDC
W, and Z 100,000 cycles
MODEL POLE SEMKO CONFIGURATION RATINGS
5 amp at 250VAC 50 Hz AC-1
165 F, P, TM thru 3PDT 5 amp at 28VDC DC-1
2.9 amp at 240VAC 50 Hz AC-3
10 amp at 250VAC 50 Hz AC-1
166 F, P, TM thru 3PDT 10 amp at 28VDC DC-1
4.9 amp at 240VAC 50 Hz AC-3
*3 Pole Devices Rated at 6-2/3 Amp When Switching Greater Than
150VAC, Unless Polarity is the Same on All Poles.
UL RECOGNIZED FILE NO.: E37066
US and Canadian Recognition
SEMKO CERTIFICATE NO.: 9726189/01-02 Model 165/166 F,P,TM
EXPECTED LIFE
Electrical At Rated Load (Minimum)
100,000 Operations Except as Noted
Mechanical Life
10,000,000 Operations
DIELECTRIC STRENGTH
800 VRMS, 60 Hz Between Contacts
2200 VRMS, 60 Hz Between All Other Elements
MODELS
160: 5 Amp Open Frame 161: 13 Amp Open Frame
165: 5 Amp Covered Plug-In 166: 13 Amp Covered Plug-In
165F: 5 Amp Flanged Cover w/QC Terminals
166F: 13 Amp Flanged Cover w/QC Terminals
166E: Addition of Blowout Magnets – For Higher DC Ratings
Other Suffixes Available
A-Indicator Lamp, B-Push to Test Button
P-Printed Circuit Terminals, TM-Top Mount Cover
COIL DATA
NOMINAL RESISTANCE NOMINAL VOLTAGE IN OHMS COIL ± 10% POWER
6VAC 5.0
AC Coils 12VAC 20 Single 24VAC 80 2.0VA Pole Units 48VAC 315 120VAC 2025
240VAC 8000
6VAC 4.5
AC Coils 12VAC 18 2 & 3 24VAC 72 2.2VA Pole Units 48VAC 285 120VAC 1850
240VAC 7200
6VDC 30
DC Coils 12VDC 120
1-3 24VDC 480 1.2W
Pole Units 48VDC 1850
110VDC 10,000
Coil Voltages: USA/Canada European
AC: Up to 277 Volts/60 Hz AC: Up to 250 Volts 50/60 Hz
DC: Up to 125 Volts DC: Up to 125 Volts
Coil Treatment: Molded Rynite® Std. Class F
Insulation Resistance: 100 Megohms Minimum
UL Insulation System File No.: E74443
S155D 155°C Total Temperature Std.
(Covers S105 Class A and S130D Class B Requirements)
OPERATE DATA
Pick Up (at 25°C): AC: Volts 85% or Less of Nominal
DC: Volts 75% or Less of Nominal
Operate Time: Approx. 15 Milliseconds
Release Time: Approx. 15 Milliseconds
ENVIRONMENTAL DATA
Operating Ambient: AC: -45° to 55°C DC: -45° to 70°C
Coil Temperature Rise: (25°C Ambient – Continuous Duty)
AC: 45°C Approx. @ 60 Hz – Use at 50 Hz will
Cause Slight Increase in Coil Rise
DC: 25°C Approx.
MECHANICAL DATA
Terminals: All Versions (Except P suffix)
.187" x .020" Quick Connect/Solder
P suffix Version Printed Circuit Pins
Cover: Clear Polycarbonate – Flammability Rating 94V2
Weight: Approx. 3 oz. (85 g)
166
161
Semko marked
upon request
model 165/166 F, P, TM
DIVISION OF DELTROL CORP.