PolyPlus0 pages
POLYPLUS BRAID.
PolyPlus Braid is an affordable 12-strand
single braid rope constructed of high
tenacity polyester plied over "Para-ep"
polyolefin in each individual strand. A
unique plying technique as well as a
generous proportion of polyester to olefin
is coupled with Yale's exclusive Aralube
treatment which optimizes the ropes
abrasion resistance. The Tara-ep" provides
body to the rope and enhances its
handling characteristics while keeping the
rope's weight to a minimum. The two end
per carrier structure makes the rope a snap
to splice, and it is entirely torque
balanced. PolyPlus Braid is the strongest
single braid polyester/polyolefin blended
rope available and is always manufactured
with dual red strands.
Diameter Average Spliced Minimum Spliced Maximum**
Inches (mm) Break Strength* Break Strength* Work Load 5:1
Kg
409
545
772
931
1,090
Weight
3/8
7/16
1/2
9/16
5/8
3/4
Lbs Kg
(9.0) 4,500 2,040
(11.0) 6,000 2,720
(12.0) 8,500 3,855
(14.0) 10,250 4,650
(16.0) 12,000 5,445
(18.0) 17,000 7,715
Lbs
4,050
5,400
7,650
9,225
10,800
15,300
Kg
1,835
2,450
3,470
4,185
4,900
6,945
Lbs
900
1,200
1,700
2,050
2,400
Lbs/
100ft
3.7
4.9
6.6
7.1
10.3
Kg/
100m
5.5
7.3
9.8
10.6
15.3
3,400 1,544 13.1 19.5
* Knots and abrupt bends significantly reduce the strength of all ropes and lowers maximum working load.
** Working load is based on static or moderately dynamic lifting/pulling operations. Instantaneous changes
in load up or down, in excess of 10% of the rope's rated working load constitutes hazardous shock load
and would void normal working load recommendation. Consult Yale Cordage for guidelines for working
loads and safe use of rope.
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
% of elastic elongation
Specific Gravity: 1.25
Energy Absorption
The colored area under the curve
represents the rope's ability to do "work"
and is expressed in foot-pounds per pound
of rope in tension.
■ Green working 395 ft. lbs./lb.
■ Red ultimate 8,228 ft. lbs./lb.
Dielectric Strength; The maximum
allowable leakage for clean, dry PolyPlus
Braid is 100 Micro Amperes when tested at
90KV per ASTM 1701-05 "Routine
Production Test". Absorbed and entrained
moisture or impurities will increase ropes
conductivity dramatically.
Splice using Yale's splicing technique
document #10015101 (all sizes).
Maximum Working Load
Minimum Break Strength
Average Break Strength
Step 2 ► |
SI 10 |