COMPASS0 pages

D832242 00201

COMPASS
ACCES CONTROL SYSTEM

• SAFE USE.
> Identification of the cards is carried out
in an environment which is separate from
the reading one, thereby guaranteeing the
system's inaccessibility even if the card
reader is tampered with.

• A MODEL FOR EVERY NEED.
> Multiple application possibility thanks to the
broad range of cards managed (up to 6000) in
standalone mode.
> The wide range of components and
accessories makes it possible to create a product
to measure for every need.
• SMART TECHNOLOGY.
> Parameter variations are made without
interrupting operation of the system.

D113684 - COMPASS SC 232
• Stand-alone unit (with no permanent PC
connection) • The system performs independent
access control, allowing functions to be configured
via the Securbase Light or Securbase Plus software
• In stand-alone mode it is able to handle 6000
recognition devices and stores all associated events and relative date and time
parameters.
COMPASS-SC: Control unit for access control systems
capable of handling up to 32 peripheral devices
(Compass-485, RTD-CA).
Supply voltage: 230 Vac.
Inputs: open pushbutton, door status sensor.
Passageway control output: 12A 250 Vac relay.
Auxiliary output (door open alarm): 12A 250Vac relay.
Connections: RS485 serial port for connecting to other system peripherals,
RS232 serial port to communicate with the PC.
Degree of protection: IP20.
Number of storable events in the stand-alone
version: 65000 without keypad.
Alarms: Buzzer.
Installation: wall-mounted
D113256 - COMPASS 485
• Installed inside the protected area, this unit
memorises the card codes and receives signals
from the Compass Slim. It manages: • door opening
input • door status input • door alarm output • door
lock output • up to 6000 cards as a stand-alone
system
COMPASS 485: Management unit for COMPASS SLIM
Power supply voltage: 230 Vac
Inputs: opening button, door status sensor
Access control output: 10A 250V relay with insulated contact
Auxiliary output (door-open alarm): 10A 250V relay
Degree of protection: IP20
Programming: by means of Master Cards or PC
Serial interface: RS485 (2 wires)
Installation: wall-mounted.

D113691 - COMPASS SC USB
The same characteristics as Compass SC but with
serial USB interface for connecting to the personal
computer.

D113257 - COMPASS 232
• To connect up to 19 Compass 485 units to the PC
serial port • All the readers can be connected to a
PC by the network to increase the number of codes
which can be managed • Also includes operation of a
Compass 485 unit
COMPASS 232: Serial converter RS485 - RS232
Power supply voltage: 230 Vac
Inputs: opening button, door status sensor
Access control output: 10A 250V relay with insulated contact
Degree of protection: IP20
Number of peripheral units which can be connected: 19
Number of cards which can be memorised in standalone version: 6000
Programming: by means of Master Cards or PC
Installation: wall-mounted.

Wiegand 26 BIT standard.

D113704 - COMPASS SLIM
• Proximity reader for indoor and outdoor use with
compact size and thickness. • Built with vandalproof materials. • Detection distance 3-4 cm.
For combination with COMPASS - SC, 485, 232.
• Compatible with RTD CA and CLONIX 4 RTE.
• Output connection with protocol according to

COMPASS SLIM: Proximity reader to be used with COMPASS SC, 485, 232.
Power supply voltage: 12Vdc (supplied by Compass SC, 485, 232)
Degree of protection: IP44
Max connection distance between reader and management unit: 10 metres
Reading distance: 3-4 cm
Signal indications: Buzzer + two-colour LED
Installation: wall-mounted.