UV-IR Laboratory dryer BE 200 pages

UV-IR Laboratory dryer
BE 20

Application:
For drying and polymerization of uv screen inks, uv glue, for printed circuit boards, laminated materials,
plastic, paper, glass, metal and other printed materials in flow process.
The lamp power lasts from 80 to 200W/cm and the machines are equipped with 1 to 3 uv lamps. As well
as to 3 IR modules. This uv dryers are used for laboratory operation or small size production.
Design:
Teflon belt (ptfe-coated) or stainless steel belt, belt width 200 mm with uv lamps , with special aluminum
reflectorsmit or (upon request) with selective folters for temperature reduction, entire lamp unit can be
raised 70 to 120 mm, dryer and electronic control can be moved due to rolls, inlet and outlet for different
materals can be adjusted between 20 and 50 mm, steppless belt speed control in the range of 1,5-15
m/min (other ranges upon request), with exhaust/cooling fan, in combioperation the machine is equipped
with mw infrared modules.
Compact Control, display of various parameters such as UV set value, operating hours, lamp current. The
Compact Control also controls the following tasks: lamp ignition, lamp fuses, idle run, overtemperature,
exhaust air, converter, installed power 400V (other power optional).

Technical Information:
Belt:
Control:
Lamp:
Lamp filling:
Lamp power:
IR-Moduls:

Teflon or steel
conventionel or PLC with touchscreen
1, 2 or 3 uv lamps
Hg (Mercury), Fe (Iron) or Ga (Gallium)
80W to 200W/cm
1 to 3 MW IR-Modules

Siemensstraße 6-8

Beltron GmbH
63322 Rödermark Telefon: 06074-89199-0 Telefax: 06074-89199-29
Email: info@beltron.de Internet: www.beltron.de