عضویت 
ورود اعضا
راهنمای خرید
E246957_1E0 pages
HSB System Heating cable HSB
nnnnBARTEC
nnnnFeatures
nnnnSelf-limiting
nnnnparallel heating cable HSB
nnnn1. Conductors:
nnnnstranded copper busbars, 1.2 mm2, nickel plated
nnnn2. Self-limiting synthetic polymer heating element
nnnn3. Fluoropolymer electrical insulation jacket
nnnn4. Tinned copper braiding
nnnn5. Protective jacket of fluoropolymer
nnnnSteam cleaning possible
nnnnSelf-limiting
nnnnCan be used in explosive atmospheres
nnnnwithout temperature limiter
nnnnCan be cut to length at random thanks to its
nnnnparallel circuit configuration
nnnnSimple installation thanks to its high
nnnnflexibility and favourable dimensions
nnnnEasy on-site cutting and terminating,
nnnneven in Ex areas
nnnnCorrosion-proof and resistant to chemical
nnnnattack thanks to its protective outer jacket
nnnnDescription
nnnnA temperature-dependant resistive element be-
nnnntween two parallel copper conductors regulates
nnnnand limits the heat output of the heating cable.
nnnnThis output regulation is carried out automati-
nnnncally along the entire length of the heating cable
nnnnaccording to the prevailing ambient temperature.
nnnnAs the ambient temperature rises, the heat out-
nnnnput of the cable is reduced. This self-limiting
nnnnproperty prevents overheating even when the
nnnncable are overlapped. A temperature limiter is not
nnnnrequired (not even in explosion hazard zones).
nnnnThanks to the parallel power supply the heating
nnnncable can be cut to any required length. This fea-
nnnnture considerably simplifies project planning and
nnnninstallation. The heating cable is cut and termi-
nnnnnated in accordance with the local requirements
nnnndirectly on the construction site. In cases where
nnnnthe cable may become damaged, it is not neces-
nnnnsary to replace the whole circuit but only the
nnnnaffected part.
nnnnBARTEC-HEAT HSB is available in different ver-
nnnnsions and with different power outputs.
"
