ELECTROPNEUMATIC PHOENIX SPECIFICATION SHEET0 pages
The Most Advanced, Automatic, ~ v ■
Non-Disposable Liquid Filtration System ZERO GRAVITY
FILTERS
Zero Gravity Filters
Electro-Pneumatic Phoenix
SPECIFICATION SHEET
Filter System | |
Filter Element | Stainless steel 316 to Aerospace specification DTD 734 with stainless steel 316 cage assemblies |
Filter Body | Stainless steel 304L. |
Diverting Valve | Stainless steel 304 with polyacetal shoe. |
Backwash Valve | %" brass ball valve, stainless steel ball and PTFE seats. |
Backwash Actuator | Double acting, developing 71 Lb Ins at 80 psi. Manufactured by Omal, size DA 8. |
Connections | Inlet and outlet are 3" stainless steel 304 ANSI bolt-hole pattern 150# flanges. Backwash connection is %" NPT female. |
O-rings and seats | Viton standard. |
Controls | |
Circuit Board | 24VDC printed circuit board. |
Differential Pressure Switch | Brass body with brass wetted parts and neoprene diaphragm standard. Operating range is 5 to 45 psi. Fitted with visual setting indicator and 1 micro switch. |
Site Requirements | |
Air Supply | 60 to 80 psi. Air line connection is %" OD push-in fitting. |
Electrical Supply | 24 VDC, 2 Amp. |
Outputs | Volt free contacts (normally open), maximum 2 amps |
Approximate Dimensions and Weight | 22 x 16 x 17" (55 x 40 x 44 cms) Dry: 75 lbs, Wet: 109 lbs (34 kgs, 49.4 kgs) |
Fluid Volume | 4.1 Gallons |
U.S.A. Headquarters
4141 Bauer Rd. Phone 810-229-7745 Email info@zerogravityfilters.com
P.O. Box 44 Fax 810-229-8862 Web www.zerogravityfilters.com
Brighton, Ml 48116
"