عضویت 
ورود اعضا
راهنمای خرید
VMECA Mini - Multiple Pump (X type)0 pages
VACUUM PUMP Minimultiple Pump
J§)VM£CAM Vtec
X - Minimultiple Pump
Max. vacuum level
Max. flow rate
Supply air pressure
Supply air type
Working temperature
Noise level
-92 kPa (-27.17 inHg)
32 Nl/min x N Stack (i.i3scfm xN stack)
4~6bar, max 7bar
(58-87 psi, max 101.5psi)
Dry compressed air
-20 °c ~ 80 °c
55-65 dBA
Main Advantages
This X-Minimultiple pump model uses individual pumps to make up the complete unit, each pump is in itself a multi stage ejetor unit. The X-Minimultiple pump has the
same external dimensions to that of the M-Minimultiple pump, however the internal ejetor system is different to enable higher levels of vacuum to be achieved. The X-
Minimulfjple pump is a pump that bridges the gap between the High Flow VTM pump range and the High Vacuum VTH Range, giving a balance of the two. Each
individual pump can be stacked togerher thus creating a modular manifold based system.
The advantages of this unit is that it can be operated using just one control valve whilst retaining individual vacuum lines separate to one another, therefore if any leak-
age or surface deformation occurs and one pad loses its vacuum, it does not effect the vacuum level in the other pads. Pumps can be stacked up from 2-16 units
depending upon requirements. The pumps can have seal material options of Viton® & EPDM for corrosive and acidic applications.
Order No.
VTX5 x 6
(D ©
A3 CL - 4 V
_ Capacity equivalent to
(1) Model - electricity motor pump size
VTX5
VTX10
0.05KW
0.1 KW
© Air supply control valve
© Vacuum port, inner dia of tube
A1
A2
A3
AC110V
AC220V
DC24V
2
4
02
04
Vacuum stack
(3) Solenoid Terminal
2-2 stack 10 - 10 stack
3
4
5
6
7
8
9
3 stack
4 stack
5 stack
6 stack
7 stack
8 stack
9 stack
11
12
13
14
15
16
11 stack
12 stack
13 stack
14 stack
15 stack
16 stack
x Remark : VTX5 maximum stack up to 16 stack
(above 12 stack complete with 2 Silencer)
VTX10 maximum stack up to 12 stack
(above 6 stack complete with 2 Silencer)
DN - DIN type without lead wire
DL ~ DIN type with lamp without lead wire
• CL*- c°nnec'or 'ype 'AMP &
0.3m lead wire
© Sealing
No mark
V
E
■ Standard (NBR)
Vitorf
EPDM
* Available only with DC24V
238
Specifications subject to change without notice.
ivwiv.vmeca.com
"
