عضویت 
ورود اعضا
راهنمای خرید
CETTF10xx-x0x0 pages
CETTF10xx-x0x
Ethernet Copper to Fiber Media Converter
Ordering Information:
Class A
CETTF1011-105
t 10BASE-T (RJ-45) [100 m/328 ft.]
tot 10BASE-FL 850nm MM (ST)
[2 km/1.2 mi.] Link Budget: 13.5 dB
CETTF1013-105
t 10BASE-T (RJ-45) [100 m/328 ft.]
tot 10BASE-FL 850nm MM (SC)
[2 km/1.2 mi.] Link Budget: 13.5 dB
Features
•t
•t
AutoCross™
•t
Link Pass Through
•t
Automatic Link Restoration
•t
•t
Can be used with any Point
System™ Chassis
Integrate mixed cabling
environments in either
switched or shared Ethernet
networks.
Field Upgradeable Firmware
Extend Network Distance
Two 10BASE-T to 10BASE-FL Media
Converters used back-to-back extend the
distance between two 10BASE-T devices up
to 5 km (3.1 mi.) using multimode fiber, up to
20 km (24.9 mi.) using single mode fiber
without a repeater.
Connect Unlike Devices
Connect your workgroup to a distant server
or a central switch; or extend distances
between like and unlike devices in either
full or half-duplex modes.
FCC & CISPR Class A devices comply with
radiated emissions standards for commercial
applications in the United States (FCC Class
A) and Europe (CISPR Class A).
•t
Connect legacy 10BASE-T
devices to a fiber based
cabling infrastructure.
CETTF1014-105t
t 10BASE-T (RJ-45) [100 m/328 ft.]
tot 10BASE-FL 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 15.0 dB
Single Fiber Products
CETTF1029-105
t 10BASE-T (RJ-45) [100 m/328 ft.]
tot 10BASE-FL 1310nm TX/1550nm RX tt
single fiber SM (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
CETTF1029-106
t 10BASE-T (RJ-45) [100 m/328 ft.]
tot 10BASE-FL 1550nm TX/1310nm RX tt
single fiber SM (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
Specifications
Standardstt
IEEE Std. 802.3, 10BASE-T; 10BASE-FL
4-position Switchtt
t
t
t
t
t
t
t
Fiber Port: Enables/disables network traffic on the t
fiber port; (Up = enabled)
Copper Port: Enables/disables network traffic on t
the copper port; (Up = enabled)
AutoCross™: Enables/disables AutoCross™ t
function; (Up = enabled)
Link Pass Through: Enables/disables Link Pass t
Through function; (Up = enabled)
3-position Jumpertt
t
t
t
Hardware: Converter mode is determined by t
4-position switch settings
Software: Converter mode is determined by most t
recently saved on-board microprocessor setting
Status LEDstt
t
t
t
t
t
t
t
t
PWR (Power): On for normal operation;
LKF (Link Fiber): Steady LED indicates good fiber t
link and normal operation;
RXF (Receive Fiber): Flashing LED indicates data t
reception on fiber link;
LKC (Link Copper): Steady LED indicates good t
copper link and normal operation;
RXC (Receive Copper): Flashing LED indicates t
data reception on copper link
Dimensionstt
Width: 0.86” [22 mm]
t
Depth: 5.0” [127 mm]
t
Height: 3.4” [86 mm]
Power Consumptiontt
2.3 Watts
Environmenttt
See chassis specifications
Shipping Weighttt
1 lb. [0.45 kg]
Regulatory Compliancett
EN55022; EN55024; EN61000; CE Mark, Class A
WarrantyttLifetime
Transition Networks, inc.ttt+1.952.941.7600tttinfo@transition.comtttwww.transition.com
,
