Due to our ongoing product development program, Vincent Associates reserves the right to discontinue or change specifications or designs at any time, without incurring any obligations.
Teflon is a registered trade mark of E.I. DuPont. U. S. Pat. No. 3,427,576; 3,595,553; 3,967,293; 6,652,165. Drawing shown for illustrative purposes only.
N-CAS® VDM1000B OPEN FRAME DRIVE CONTROLLER
UNIBLITZ®II
By
Vincent Associates
803 Linden Avenue, Rochester, NY 14625
The VDM1000B is the optimal driver for the new UNIBLITZ
® II N-CAS®, NS series shutters. The driver has user
-selectable function switches allowing it to handle a
variety of shutter configurations. It will operate a NCAS
® shutter in a uni-stable (normally open or normally
closed) mode, or bi-stable mode where no power is
required to hold the shutter open or closed. In addition
to this capability, the N-CAS® circuit can be disabled,
allowing the VDM1000 to operate standard LS, VS and
CS series shutters.
The VDM1000B operates from a user supplied +36VDC
power supply. It can be easily integrated into OEM applications
where +36VDC is available
VDM1000B Printed Cir cuit Card Layout and
Clearance Outline.
510A - 5-pin male Switchcraft to 5-pin female Switchcraft, 3 meters
Use with shutters NS25, NS45, CS25, CS35 and QCS45.
710A - 5-pin male Switchcraft to 7-pin female WPI, 3 meters
Use with shutters in the LS and VS series including the CS45 and CS65
5103C - 5-pin male Switchcraft to 3-pin female Positronic, 3 meters
Use with shutter, NS15.
710R/F - BNC male to foot activated switch, 10 feet
810RJ - 8-pin RJ45 plug to 9-pin DB9 female, 10 feet
PS36 - 36VDC, 1.83A, Power Supply UL/CE Certified
Optiona l Items:
Open frame printed circuit card suitable for OEM applications.
Can fit in a 3U EURO CARD SLOT (See Figure 1)
RoHS Compliant
Operates N-CAS® shutter in a bi-stable or uni-stable mode
5-pin Switchcraft locking shutter interface connector.
Operates existing UNIBLITZ® shutters such as CS, VS and LS series.
710A interconnect cable required, not included.
N.O./N.C. switch for normally open or normally closed shutter operation
LED’s for power, driver, and sync active indication
Exposure determined by external pulse (BNC, TTL) or switch contact
closure to PULSE INPUT BNC
SYNC OUTPUT BNC can be selected for either active-low or active-
high
PULSE INPUT BNC can be selected for either active-low or active-
high
RS-232C input and output connection accessible via dual RJ45 connector
RS-232C input addressable via 8 selectable addresses
Up to 8 units can be controlled independently from one computer serial
port
Units can be easily daisy chained with optional RJ45 cable,
810RJ, not included
Status of electronic sync available from SYNC OUTPUT BNC
(TTL) and can be read back from RS-232 interface
Synchronization system can be disabled via user-selectable
function switch
Selectable pulse energy for operation of large aperture shutter devices,
which require additional high-energy pulse for their operation
Selectable pulse high current duration for specific shutters via
8-position select switch
Internal fuse protection for all DC output voltages (including shutter)
Operates on +36VDC at 1.83A, Fuse protected
Power input to controller via 2.0 mm jack, on/off control with
rocker switch
+36VDC external power supply, PS36, not included
3U Euro Card PCB outline
Size (HWD) 1.20 x 4.00 x 6.30 in. (30.0 x 100.0 x 160.0 mm)
Weight 6.00 oz (0.17kg)