AT17F040/080 4 and 8 Mbit In-System Programable PROM (3.3V)0 pages

AT17F040 and AT17F080
FPGA Configuration Flash Memory
DATASHEET
Features

Programmable 4,194,304 x 1 and 8,388,608 x 1-bit Serial Memories Designed
to Store Configuration Programs for Field Programmable Gate Arrays (FPGAs)
3.3V Output Capability
5.0V Tolerant I/O Pins
Program Support using the Atmel ATDH2200E System, ATDH2225 ISP cable,
or Third-party Programmers
In-System Programmable (ISP) via 2-wire Bus
Simple Interface to SRAM FPGAs
Compatible with Atmel AT40K and AT94K Devices, Altera® FLEX®, APEX™
Devices, Lucent® ORCA® FPGAs, Xilinx® XC3000, XC4000, XC5200,
Spartan®, Virtex® FPGAs, and Motorola® MPA1000 FPGAs
Cascadable Read-back to Support Additional Configurations or Higher-density
Arrays
Low-power CMOS FLASH Process
Available in 6mm x 6mm x 1mm 8-pad LAP (Pin-compatible with 8-lead
SOIC/VOIC Packages) and 20-lead PLCC Packages
Emulation of the Atmel AT24C Serial EEPROMs
Low-power Standby Mode
Single Device Capable of Holding 4-Bitstream Files Allowing Simple System
Reconfiguration
Fast Serial Download Speeds up to 33MHz
Endurance: 100,000 Write Cycles Typical
Green (Pb/Halide-free/RoHS Compliant) Package Options

Description
The Atmel® AT17F Series of In-System Programmable Configuration PROMs
(Configurators) provide an easy-to-use, cost-effective configuration memory
solution for FPGAs. The AT17F Series devices are packaged in the 8-pad LAP
and 20-lead PLCC packages (Table 1-1). The AT17F Series Configurators use a
simple serial-access procedure to configure one or more FPGA devices.
The AT17F Series Configurators can be programmed with industry-standard
programmers, the Atmel ATDH2200E Programming Kit or the Atmel ATDH2225
ISP Cable.
Table 1.

AT17F Series Packages

Package

AT17F040

AT17F080

8-pad LAP

Yes

Yes

20-lead PLCC

Yes

Yes

Atmel-3039M-CNFG-AT17F040-080-Datasheet_012015