CC1200 Low-Power, High-Performance RF Transceiver (Rev. C)0 pages

Product
Folder

Sample &
Buy

Technical
Documents

Tools &
Software

Support &
Community

CC1200
www.ti.com

SWRS123C – JULY 2013 – REVISED JUNE 2014

CC1200 Low-Power, High-Performance RF Transceiver
1 Device Overview
1.1

Features

1

• RF Performance and Analog Features:
– High-Performance, Single-Chip Transceiver
• Excellent Receiver Sensitivity:
– –123 dBm at 1.2 kbps
– –109 dBm at 50 kbps
• Blocking Performance: 86 dB at 10 MHz
• Adjacent Channel Selectivity: Up to 60 dB at
12.5-kHz Offset
• Very Low Phase Noise: –114 dBc/Hz at 10kHz Offset (169 MHz)
– Programmable Output Power Up to +16 dBm
with 0.4-dB Step Size
– Automatic Output Power Ramping
– Supported Modulation Formats:
2-FSK, 2-GFSK, 4-FSK, 4-GFSK, MSK, OOK
– Supports Data Rate Up to 1.25 Mbps in
Transmit and Receive
• Low Current Consumption:
– Enhanced Wake-On-Radio (eWOR)
Functionality for Automatic Low-Power Receive
Polling
– Power Down: 0.12 μA (0.5 μA with eWOR Timer
Active)
• RX: 0.5 mA in RX Sniff Mode
• RX: 19 mA Peak Current in Low-Power
Mode
• RX: 23 mA Peak Current in HighPerformance Mode
• TX: 46 mA at +14 dBm
• Other:
– Data FIFOs: Separate 128-Byte RX and TX
– Support for Seamless Integration with the
CC1190 Device for Increased Range Providing
up to 3-dB Improvement in RX Sensitivity and
up to +27 dBm TX Output Power

1.2
•
•
•

•

• Digital Features:
– WaveMatch: Advanced Digital Signal
Processing for Improved Sync Detect
Performance
– Security: Hardware AES128 Accelerator
– Data FIFOs: Separate 128-Byte RX and TX
– Includes Functions for Antenna Diversity
Support
– Support for Retransmission
– Support for Auto-Acknowledge of Received
Packets
– Automatic Clear Channel Assessment (CCA) for
Listen-Before-Talk (LBT) Systems
– Built-in Coding Gain Support for Increased
Range and Robustness
– Digital RSSI Measurement
– Improved OOK Shaping for Less Occupied
Bandwidth, Enabling Higher Output Power While
Meeting Regulatory Requirements
• Dedicated Packet Handling for 802.15.4g:
– CRC 16/32
– FEC, Dual Sync Detection (FEC and non-FEC
Packets)
– Whitening
• General:
– RoHS-Compliant 5- x 5-mm No-Lead QFN 32
Package (RHB)
– Pin-Compatible with the CC1120 Device
• Regulations – Suitable for Systems Targeting
Compliance with
– Europe: ETSI EN 300 220, EN 54-25
– US: FCC CFR47 Part 15, FCC CFR47 Part 90
– Japan: ARIB STD-T30, T67, T108

Applications

Low-Power, High-Performance, Wireless Systems
with Data Rate Up to 1250 kbps
ISM/SRD Bands: 169, 433, 868, 915, and
920 MHz
Possible Support for Additional Frequency Bands:
137 to 158.3 MHz, 205 to 237.5 MHz, and 274 to
316.6 MHz
Smart Metering (AMR/AMI)

•
•
•
•
•
•
•

Home and Building Automation
Wireless Alarm and Security Systems
Industrial Monitoring and Control
Wireless Healthcare Applications
Wireless Sensor Networks and Active RFID
IEEE 802.15.4g Applications
Wireless M-Bus, All Modes

1

An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.