ControlNet Fiber Optic Repeaters0 pages
Shenzhen Comark technology Co., Ltd.
Ci-cf110/120 series datasheet
Ci-cf110/120 Series ControlNet Fiber Optic Repeaters
Summarize
The Ci-cf110/120 series is designed for use in optical ControlNet fieldbus networks. Feature with data rate up to 5M,35mm DIN rail
mounting, redundancy power input(9V~30VDC),relay output alarm. Ci-cf110 contains one fiber optic transceiver and one electrical
interface.Ci-cf120 contains two fiber optic transceivers and one electrical interface. The repeaters provide fiber optic connection in
point to point, star, daisy chain topologies networks.
Specifications
Electrical interface
Wire Cable Connection: BNC f-male
Signal type: ControlNet fieldbus
Data Rate:5M
Isolation voltage: Instantaneous voltage 5000V, constant voltage 1000V
Wire End Termination:Internal,75Ω
Optical interface
Wave length: multi mode 850nm
1310 nm; single mode 1310 nm
Fiber type: multi mode 50/125um 62.5/125um
1550nm
100/140um;single mode 8.3/125 um
Transmission distance: MM 2Km, SM 20Km
Fiber interface type: ST/SC/FC (optional); ST (standard configuration).
Power
Input Voltage: 24VDC(9VDC~30VDC)
Support dual power backup
Consumption:24VDC@60mA(
1.5W)
With DC1000V voltage isolation and reverse connect protection
5-pin Pluggable Screw Terminal
Relay
Contact rating: DC48V/1A Max
Fiber link fault and No voltage input alarm
Industrial Pluggable Screw Terminal
Mechanical
Dimensions: 132mm×52mm×105mm (H×W×D)
Casing: IP30 protection, Metal case
Installation: 35mmDIN-Rail, Wall Mounting
Weight :800g
Environmental
Operating Temperature: -10
Storage Temperature: -40
to 70
(-40
to85
optional)
to 80
Ambient Relative Humidity: ≤90% (non-condensing)
Website: www.comark.cn
V4.1
9/125um
10/125um
"