Zhongji EPS Automatic Vacuum Block Molding Machines With CE0 pages
EPS i^i««Sfji
Jinx #iP« ffii^x frJEiJEtfjWfi
4,«ia%fflttss«i#ttMA, #£att&&3, HEWS®
Kffi, mi§£^#lftSJ£^j&IiJ6-40kg/m3, #
«i
1150mmFS;K*f, ftRT^^Sfi^lOOOmmMieSilStt.
Main Features
l.With the use of PLC Controller (Programmable Logic Controller) and
Touch Screen, the automatic looping process of opening and closing of the
moulds, feeding, heating, heat preservation, cooling, mould ejection, and
releasing the final product from the machine will be accomplished;
2. The Automatic Vacuum Control System does the feeding, heating, heat
preservation and cooling;
3. The Vacuum System consists of the Vacuum Storage Tank, Vacuum
cooling Tank, and highly efficient water-recycling vacuum pump;
4. The machine is coupled by using high quality welding method, and goes
through aging treatment, which gives the machine high strength, and
without deformation. The density of the EPS Block can reach 6~40kg/m3,
with fast EPS Block forming speed, uniform bonding, low moisture content,
and with very minor deformation;
5. Applying a special Teflon coating to the surface of the mould cavity
(Optional) makes the EPS Block to be easily ejected or released out of the
mould;
6. The thickened wall Vacuum EPS Block Forming Machine has Automatic
Conveyer, Automatic Electronic Weighing Scale, and the Automatic
Printer;
7. This machine can be used to produce the width of 850mm, 950mm and
1150mm EPS Blocks, and also produce the width of 1000mm EPS Block
for buildings.
271 EPS PRODUCTION LINE
EPS Automatic Vacuum Block Molding Machines
i£##f& Technical Data
Number | JRB Items | IMS Type Unit | EPSBM6000V | EPSBM6000CV | EPSBM8000V | EPSBM8000CV | |
1 | &&\>3ftR-* Mould Size | mm | 6120X1230X1050 | 6080X1230X630 | 8110X1240X1040 | 8100X1230X630 | |
2 | Mould Volume | m3 | 7. 96 | 4.71 | 10.46 | 6. 28 | |
3 | ffliBiSJt/fcfcJi Products Density/Specific Gravitjkg/m3 | 6-40 | 6-45 | 6-35 | 6-40 | ||
4 | t£f*tfr$i (feit&ft) Production Capacity | block/h | 4-12 | 4-13 | 3-11 | 4-12 | |
5 | OfiKBijj Steam Pressure | mpa | 0.6 | 0.6 | 0.6 | 0.6 | |
6 | Hi^ttnjlS Steam Inlet | DN | mm | 100 | 150 | 150 | |
7 | BMS.'^MDM^i compressed-Air Inlet DN | mm | 50 | 65 | 65 | ||
Power Supply | 5&$ Power | kw | 30 | 30 | 30 | ||
8 | %J5 Voltage | V | 380 | 380 | 380 | ||
9 | SW^rS Control Mode | S^ft Automatic | S^d Automatic | SSl Automatic | £3z$I Automatic | ||
10 | SfflWjn! Structural Features | Hydraulic Single-door Vacuum Cooling | Hydraulic Single-door Vacuum Cooling | Hydraulic Single-door Vacuum Cooling | «snnji£*sp Hydraulic Single-door Vacuum Cooling | ||
11 | afflUgt Control System | PLCSAttWH PLC with Touch Screen | PLCSAW.WH PLC with Touch Screen | PLCSA«l^H PLC with Touch Screen | PLC&AfllSH PLC with Touch Screen | ||
12 | MttthMR^ Max. Outer Dimension | mm | 14000X4000X3000 | 14000X3000X3000 | 16000X4000X3000 | 16000X3000X3000 | |
13 | SMflJtit Machine Net Weight | tons | 15 | 12 | 13 | ||
14 | SS&lfiSSX Automatic Conveyer | BE Supplied | BJJ4 Optional | IE Supplied | Optional | ||
15 | Si^PftJf Electronic weighing Scale | IE Supplied | nJiS Optional | IE Supplied | WiS Optional | ||
16 | JTEp Printer | BJS Optional | BJJS Optional | B!& Optional | nJiS Optional |
The mould sizes mentioned in the above table are our standard mould sizes. But customers can also provide their own different mould sizes.
EPSPR0DUCTI0NLINE 28
"