عضویت 
ورود اعضا
راهنمای خرید
Labeling0 pages
cut
Imer
cutting room technology
LU
tn
5)
o
o
c
.c
o
|2
c
o
■a
■a
<
Application range:
Suitable for use in a wide range of industry sectors
and areas of application.
Material use:
All types of material can be processed with the
tools of the MFB8001.
Special properties:
The MFB 8001 was designed to offer different
tools complementing those provided on other cut-
ting bridges available from topcut-bullmer. These
include equipment for labelling and ultrasonic
sealing, ink-jet printer as well as further optional tools.
lulti-Function Bridge (MFB) 8001
The MFB 8001 consists of a control system with
a maximum configuration of 4 axes (X-Y-Z-C) for
material stacks of up to 80 mm in height.
The transverse support is equipped with a toothed
belt drive, carries the printing unit and the label
placer. Operating like a plotter, the coordinate carri-
age with the labeller and label placer moves to the
defined label position and deposits the self-adhesive
label. If labelling is to be performed at several buffer
or transfer stations, the marker can be relocated
between stations by means of a transfer vehicle.
Option Labeller
Using the MFB 8001 with labeller, the panels are
marked automatically with the details required for
the subsequent processing either before or after the
automatic cutting.
The MFB 8001 receives all the data required for
the marking from the marker system (CAD) via the
network, a USB stick or offline (e.g. plotfile).
"
