SG 14 Series0 pages
SPACEGUARD ™ SERIES
SG 14
Description
ᔢ
1-10 metre sensing range
ᔢ
16 to 56 parallel beams
ᔢ
Active height of 695 mm to 2535 mm
ᔢ
Detector length of 850 mm to 2800 mm
ᔢ
Cable or plug connection
ᔢ
Automatic sensitivity adjustment
ᔢ
Water-resistant slim line (12x30 mm) or
leading edge (38,4x14 mm) detector housing
ᔢ
Power, output and signal status indicators
ᔢ
12 – 36 V dc supply voltage
ᔢ
Dynamic sequential blanking function
ᔢ
5 wire, solid state relay output
ᔢ
Test input
The
SG
14
light
curtain
system
consists
of
a
misalignment and contamination during operation. Transmitter and
self-contained
receiver detectors are optically synchronised.
transmitter detector, SGT and receiver detector, SGR, which are to be
positioned opposite of each other. The detectors are housed in a
The SG 14 series features the Dynamic Sequential Blanking Function which
sturdy aluminium profile available in a slim line design (12 x 30 mm) or a
allows the detectors to be positioned in the guide tracks of an industrial door,
leading edge design (38,4 x 14 mm).
where the door travels directly in front of the protection area, interrupting the
The SGR is supplied with a 12 – 36 V dc power supply with a 5 wire,
beams sequentially from top to bottom. The special feature ensures that the
solid state relay output, with wire selectable dynamic blanking function.
system can distinguish between the closing door and an object by ignoring
The test input in the SGT may be used for either disabling or enabling the
the beams that are obstructed by the moving door whilst leaving the below
transmitting power temporarily for test purposes.
remaining beams active to detect an object in the protection area.
The advanced automatic signal-tracking (AST) feature ensures that
Both the transmitter and receiver detectors are protected against reverse
no onsite set up or adjustments are required. The signal level of each
polarity of power supplies, control input and output signals. The output is
individual channel is adjusted automatically, which compensates for
also protected against short circuit and inductive loads.
Technical Data
SGT
SGR
Supply voltage
12 – 36 V dc
Current consumption
Output rating
Max. 70 mA
Short circuit protected
50 mA
–
Solid state
200 mA
–
Yes
Reverse polarity protected
Yes
Light source
Infrared (880 nm)
–
Number of channels (diodes per detector)
16, 24, 32, 40, 48 or 56
Number of parallel beams
16, 24, 32, 40, 48 or 56
Active height
695, 1065, 1430, 1800, 2165 or 2535 mm
Between channel 1 and bottom of housing: 25 mm
Between other channels: 46 mm
Channel spacing
Response time
16/24 chs: 24 ms 32 chs: 30 ms 40 chs: 37 ms
48 chs: 43 ms 56 chs: 49 ms
–
Maximum / minimum sequential blanking speed
1,6 m/s / 0,05 m/s
Minimum size of blanking object
55 mm
Power on indicator
Green LED
Output indicator
–
System status indicator
–
Yellow LED
Red LED
Time-out function
Housing dimensions (w x d)
Housing material
–
Slim Line
C
12 x 30 mm
Leading Edge D
38,4 x 14 mm
Profile
Aluminium (black anodised)
Lens cover
Polycarbonate
Connection
Cable, PVC Ø 4,9 mm
5 m fixed cable or 5 pin, M12 plug
3 x 0,20 mm2
WWW.TELCOSENSORS.COM
5 x 0,20 mm2
SELF-CONTAINED LIGHT CURTAIN SYSTEMS
I 1
"